KingCoat Primer P®
Epoxy based primer.
Overview
KingCoat Primer P is a multi-component solvent based epoxy primer especially formulated to be used in conjunction with KingCoat A100 to significantly improve its adhesion characteristics on steel and concrete surfaces. KingCoat Primer P is supplied in form of epoxy base material and hardener which should be mixed together prior to using, it can be also supplied with a colour pack to match the colour of the topcoat material and thus lower the consumption of KingCoat A100 and provide a uniform
Advantages
- Significantly improves the adhesion of KingCoat A100 over concrete and steel substrates
- Easy to apply, can be spread by roller, brush or airless spray
- Can be supplied in different colours to match the colour of the topcoat material
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Mixed density | 1.35 ± 0.05 g/cm3 | — |
| Pot life | 2.5 - 3.5 hr | — |
| Over-coating time | Minimum 6 hr 24 hr Maximum | — |
| Full cure | 7 days | — |
| Bond strength on C25/30 | ≥ 2.0 MPa @ 7 days | — |
| concrete | : (concrete failure) | ASTM D4541 |
Standards & Approvals
Usage & Packaging
KingCoat Primer P is available in 5 kg packs (3.85 litre) and 20 kg packs (15.4 litre).
Approximately 5.5 - 6.5 m2/kg to achieve 70 - 80 microns dry film thickness.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack
Product family
High performance flexible epoxy polyurethane resin protective coating.
One component water based acrylic elastomeric protective anti carbonati…
Water based high performance acrylic protective and decorative coating.
Water based high performance acrylic protective and decorative coating …