KingCoat CR100®
High chemical resistant solvent free epoxy protective coating for concrete and metal.
Overview
KingCoat CR100 is a solvent free, high build epoxy resin protective coating with outstanding chemical and mechanical properties. KingCoat CR100 is supplied as a two component product in pre-weighed base and hardener packs, ready for site
Applications
- KingCoat CR100 is designed for internal applications such as:
- Heavy duty indoor protective coating for concrete and steel
- Heavy duty wall and floor coating in food processing plants, grain silos, dairies, breweries ,hospitals, and pharmaceutical industries
- High chemical resistant protective coating for power stations, oil refineries, and sewage treatment plants
Advantages
- Solvent free and low odour
- Excellent resistance to mould and fungus growth
- Excellent resistance to a variety of chemicals
- Easy to clean with a smooth, hard and glossy finish
- Excellent abrasion resistance
- Exhibits good mechanical properties
- Resistant to sewage effluents
- Excellent adhesion to concrete and steel
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Specific gravity | 1.3 ± 0.05 g/cm3 | — |
| Solid content | 100% | — |
| Colour | Red, green & cement grey | — |
| Abrasion resistance | Excellent Bond strength over C25/30 > 2 MPa | — |
| concrete | ASTM D4541-85 | |
| Pot life | 40 - 50 min @ 25°C 30 - 40 min @ 35oC | — |
| Re-coatable time | Between 5 - 16 hr @ 25oC | — |
| Full cure | After 7 days @ 25°C 4 days @ 35oC | — |
| Compressive strength | BS: > 65 MPa @ 7 days 6319, Part 2 | — |
| Tensile strength | ,: > 15 MPa @ 7 days Part 7 | BS 6319 |
| Flexural strength | , ≥ 30 MPa Part 3 | BS 6319 |
| Taber abrasion resistance | 150 milligram (1000 g, 1000 cycle) , weight loss CS17 wheel | ASTM D4060 |
| Light foot traffic | 1 day @ 25oC | — |
| Application temperature | 5 to 35oC | — |
| Service temperature | -20 to 50oC | — |
| Water absorption | ASTM: < 0.1% D570 | — |
| VOC | < 10 g/ltr | — |
Standards & Approvals
Usage & Packaging
KingCoat CR100 is available in 5 kg packs (3.85 litre).
For Smooth finish Approximately 19 m² per pack per coat to give 200 microns dry film thickness. Two coats should be applied to achieve 400 microns dry film thickness. For Antislip finish Depending on the Antislip Aggregate size used the consumption will v
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack
Product family
High performance flexible epoxy polyurethane resin protective coating.
One component water based acrylic elastomeric protective anti carbonati…
Water based high performance acrylic protective and decorative coating.
Water based high performance acrylic protective and decorative coating …