KingCoat EP100W®
Water-dispersed epoxy coating for curing and protection of cementitious substrates.
Overview
KingCoat EP100W is a two-component water dispersed epoxy coating designed to cure and protect cementitious and precast concrete segments and substrates immediately after de-mouldings providing a hard, seamless, hygienic and cosmetic finish to interior concrete floors, walls, and precast segments. KingCoat EP100W can be supplied in a range of colours (consult our sales Department for details).
Applications
- KingCoat EP100W is used to cure and protect concrete segments, walls, and floors. Typical applications are:
- Precast concrete segments
- Cementitious and concrete structures subjected to slightly aggressive chemicals
- Hospitals and pharmaceutical factories walls
- Food and beverage industries
- Kitchens, restaurants, reception and public areas
- Public buildings and retail environments
- Protection of cementitious surfaces in confined and badly ventilated areas, where the use of solvents is prohibited
- Light vehicular traffic areas
Advantages
- Water dispersed
- Suitable for application on fresh concrete
- Odourless, hygienic and cosmetic finish
- Cures and protects precast concrete segments
- Excellent barrier against water and the ingress of ions
- Good protection against de-icing salts
- Good resistance to weak acids, bases, and chemicals
- Good abrasion resistance
- Easy to apply
- Easy to clean and to maintain
- Available in a wide range of attractive colours
- Low VOC, complies with LEED requirements
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Appearance | Matt finish | — |
| Colour | Can be supplied in a range of colours | — |
| Mixed density | 1.22 ± 0.05 g/cm³ | — |
| Solid content | By Volume By 52 ± 2% 66 ± 3% Weight | — |
| Pot life | 50 - 80 min | — |
| Recommended film | 70 - 100 microns dry per | — |
| thickness | coat | — |
| Minimum time between coats | 4 - 6 hr @ 25⁰C 2 - 3 hr @ 35⁰C | — |
| Maximum time between | 24 hr @ 25⁰C 12 hr @ | — |
| coats | 35⁰C Minimum curing time before 10 hr @ 25⁰C 4 hr @ 35⁰C | — |
| transportation of segments | — | |
| Full cure | 7 days | — |
| VOC | : < 30 g/ltr (complies with LEED) | ASTM 2369 |
Standards & Approvals
Usage & Packaging
KingCoat EP100W is supplied in 5 and 20 kg packs.
The coverage rate is 330 - 470 g/m2 to achieve dry film thickness of 140 - 200 microns per two coats.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack
Product family
High performance flexible epoxy polyurethane resin protective coating.
One component water based acrylic elastomeric protective anti carbonati…
Water based high performance acrylic protective and decorative coating.
Water based high performance acrylic protective and decorative coating …