KingCoat E100®
Nontoxic solvent free epoxy protective coating for concrete and metal.
Overview
KingCoat E100 is a solvent free, non-toxic; high build epoxy resin protective coating with outstanding chemical and mechanical properties. KingCoat E100 is supplied as a two component product in pre-weighed base and hardener packs, ready for site mixing.
Applications
- KingCoat E100 is designed for internal applications such as:
- Heavy duty protective coating for concrete and steel
- Internal protective lining for potable water concrete or steel tanks
- Heavy duty wall and floor coating in food processing plants, grain silos, dairies, breweries , hospitals, pharmaceutical industries and car parks
- High chemical resistant protective coating for power stations, oil refineries, and sewage treatment plants
Advantages
- Approved for use in contact with potable water
- Produces a seamless, glossy, glass-like surface that is both easy to clean and does not induce bacterial and fungal growth
- Excellent resistance to a variety of chemicals
- Easy to clean with a smooth, hard and glossy finish
- Non-toxic
- Exhibits good mechanical properties
- Resistant to sewage effluents
- STANDARDS KingCoat E100 complies with the requirements of BS 6920:2000
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Specific gravity | 1.60 ± 0.1 | — |
| Solid content | 100% | — |
| Colour | Various Bond strength over C25/30 ≥ 2 MPa @ 7 days | — |
| concrete | : (substrate failure) | ASTM D4541 |
| Pot life | 100 min @ 25°C 45 min @ 35°C | — |
| Re-coatable time | Minimum 4 hr @ 25°C 24 hr @ 25oC Maximum | — |
| Full cure | After 7 days @ 25°C | — |
| Chemical resistance | Refer to DPC chemical resistance table | — |
| Compressive strength | BS: ≥ 80 MPa @ 7 days 6319-2 | — |
| Tensile strength | ≥ 25 MPa @ 7 days | BS 6319-7 |
| Flexural strength | ASTM: ≥ 30 MPa @ 7 days D580 | — |
| Taber abrasion resistance | 70 milligram (1000 g, 1000 cycle) , weight loss CS17 wheel | ASTM D4060 |
| VOC | : < 20 g/ltr (complies with LEED) | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingCoat E100 is available in 5 kg packs (3.1 litre) and 20 kg (12.5 litres) packs.
Approximately 0.30 - 0.35 kg/m2 per coat. Two coats should be applied to achieve a total of 400 microns dry film thickness.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack
Product family
High performance flexible epoxy polyurethane resin protective coating.
One component water based acrylic elastomeric protective anti carbonati…
Water based high performance acrylic protective and decorative coating.
Water based high performance acrylic protective and decorative coating …