KingFloor EP100®
Solvent free high build epoxy floor coating for thickness up to 200 microns in one coat
Overview
KingFloor EP100 is a high build, hard wearing, solvent free epoxy resin coating, designed to provide a hard, gloss coating to concrete floors. It is supplied as two pack material in addition to a colour pack in pre weighted quantities ready for onsite mixing and use. KingFloor EP100 permits the application of floor coatings in excess of 200 microns per coat and can be coloured to suit site requirements. With the addition of Antislip Aggregate (Slip resistant aggregate No. 2 or 3) between coats, slip resistant floor system can be achieved with a buildup thickness between 1.25 to 2 mm.
Applications
- KingFloor EP100 is used as protective, decorative, high chemical resistance and hard wearing floor coating system for a wide range of applications including:
- Aircraft hangars
- Car parks
- Soft drink and beverage production areas
- Dairies production areas
- Show rooms
- Hospitals
- Production, maintenance and assembly areas
- Warehouses
- General food processing and manufacturing plants
Advantages
- Produces a seamless, glossy, glass-like surface that is both easy to clean and does not induce bacterial and fungal growth
- High chemical and mechanical resistance
- Available in a wide range of attractive colours
- Cost effective
- Easy application
- High build
- STANDARDS KingFloor EP100 complies with the requirements of EN 1504-2, Surface Protection Systems principle 5.1
- up to 200 microns in one coat
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Available in different colours | — |
| Mixed density | 1.40 ± 0.05 g/cm³ | — |
| Solid contents | 100% | — |
| Pot life | 50 - 70 min @ 25°C 20 - 40 min @ 35°C | — |
| Minimum time between coats | 12 hr @ 25°C 6 hr @ 35°C | — |
| Maximum time between | 36 hr @ 25°C 18 hr @ | — |
| coats | 35°C | — |
| Full curing time | 7 days @ 25°C 5 days @ 35°C | — |
| Compressive strength | BS: ≥ 80 MPa @ 7 days 6319-2 | — |
| Flexural strength | EN: ≥ 30 MPa @ 7 days 13892-2 | — |
| Tensile strength | ≥ 20 MPa @ 7 days | ASTM D638 |
| Bond strength on C25/30 | ≥ 2 MPa @ 7 days | — |
| concrete | EN (concrete failure) 1542 | ASTM D4541 |
| Shore D hardness @ 14 | 85 | — |
| days | ASTM D2240 | |
| Water absorption | ASTM: ≤ 0.15% D570 | — |
| Taber abrasion resistance | ≤ 65 milligram (1000 g, 1000 cycle) , weight loss CS17 wheel | ASTM D4060 |
| VOC | : ≤ 10 g/ltr (complies with LEED) | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingFloor EP100 is available in 6 kg packs (4.25 litre), 18 kg packs (12.75 litre) and 30 kg packs (21.3 litre).
Standard coverage: KingFloor Primer S: 5 m²/kg. KingFloor EP100(base coat): 0.28 - 0.29 kg/m². KingFloor EP100 (top coat): 0.28 - 0.29 kg/m². Approximate system thickness: 500 - 600 microns. Antislip coverage when used with Anti-slip Aggregate #2 to achie
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack