KingFloor EP100T®
Heavy duty epoxy topping for floor surfaces.
Overview
KingFloor EP100T is a three-pack solvent free, epoxy- based topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive finish. KingFloor EP100T is applied by trowel and can be coved and laid to falls and has a very good durability towards pedestrian and vehicular traffic. It also has very good resistance towards many of the chemicals commonly found in an industrial environment (consult our Technical department for further details). KingFloor EP100T has a finish that provides very good slip resistance and can be supplied in a natural colour and variety of colours, it is also available in a decorative quartz finish (consult our Sales Department for details).
Applications
- KingFloor EP100T is used to provide a hygienic, dense and extremely hard wearing surface for concrete floors for a wide range of applications such as:
- Warehouses
- Paint workshops
- Dairies
- Chemical factories
- Oil refineries
- Freezers and refrigerated storage (at 5 mm thickness)
Advantages
- Extremely hard wearing system
- Solvent free
- Non-slip
- Available in a wide range of attractive colours
- Available in a decorative quartz finish
- Resist a wide range of chemicals, consult KINGKRETE technical department for more details
- STANDARDS KingFloor EP100T complies with EN 13813, Class SR- B2.0-AR0.5-IR10
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Mixed density | 2.1 ± 0.1 g/cm3 | — |
| Compressive strength | ASTM ≥ 95 MPa @ 7 days C579 | — |
| Flexural strength | EN: ≥ 30 MPa @ 7 days 13892-2 | — |
| Tensile strength | ≥ 17 MPa @ 7 days | BS 6319-7 |
| Pot life | 50 - 70 min | — |
| Foot traffic | After 24 hr | — |
| Vehicular traffic | After 72 hr | — |
| Full chemical cure | 7 days | — |
| Bond strength on C20/25 | ≥ 2 MPa @ 7 days | — |
| concrete | : (concrete failure) | EN 1542 |
| Maximum wear depth | EN: ≤ 0.05 mm 13892-4 | — |
| Impact resistance | ISO: Pass @ 10 N.m @ 7 days 6272-2 | — |
| Shore D hardness | ASTM: ≥ 80 D2240 | — |
| VOC | : ≤ 20 g/ltr (comply with LEED) | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingFloor EP100T "natural" is available in 29.35 kg packs (14 litre). KingFloor EP100T "coloured" is available in 30 kg packs (14.3 litre) including colour pack. KingFloor Primer is available in 5 kg packs. 2 - 5 mm.
KingFloor EP100T: Approximately 2.75 - 3.00 m²/kit @ 5 mm thick. KingFloor Primer: 5 m²/kg.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack