KingCoat SF100W®
Water based, damp tolerant, 0.5 - 1.5 mm thick self-leveling epoxy topping for floor surfaces
Overview
KingCoat SF100W is four component, damp tolerant, water based epoxy self-leveling topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive matt finish. KingCoat SF100W is applied by trowel or rack to horizontal surfaces and has very good durability towards pedestrian and light vehicular traffic. It also has very good resistance to many chemicals. It can be supplied in a variety of colours (consult our sales Department for details). KingCoat SF100W cures to a durable and hard wearing matt finish.
Applications
- KingCoat SF100W is used to provide a seamless hygienic, dense and hard wearing surface for concrete floors for a wide range of applications such as:
- Hospitals
- Pharmaceutical factories
- Showrooms
- Laboratories
- Light industrial plants
- Kitchens, Restaurants and reception areas
- Schools, colleges, and universities
- Retail environments, offices and in all places that stay occupied during flooring applications
Advantages
- Rapid drying time permits faster use of floors
- Good chemical resistance to a wide range of chemicals
- Hygienic and cosmetically attractive seamless matt finish
- Easy to clean and to maintain
- Available in a range of attractive colours
- Zero VOC, complies with LEED requirements
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Appearance | Matt | — |
| Colour | Wide range of colours | — |
| Mixed density | 1.60 ± 0.05 g/cm3 | — |
| Pot life | 20 min | — |
| Foot traffic | 24 hr | — |
| Light traffic | 48 hr | — |
| Bond strength | ASTM: > 2 MPa (concrete failure) D4541-95 | — |
| Compressive strength | BS: > 30 MPa @28 days | — |
| 6319, part 2 | 1983 | — |
| Flexural strength | , > 10 MPa @28 days | BS 6319 |
| part 3 | 1990 | — |
| Tensile strength | ,: > 3.5 MPa @28 days | BS 6319 |
| part 7 | 1985 | — |
| Shore D hardness | ASTM: > 60 @28 days D2240 | — |
| Taber abrasion resistance | 90 mg @28 days (1000 g, 1000 cycle) , weight loss CS17 wheel | ASTM D4060 |
| VOC | : < 10 gr/ltr (complies with LEED) Concrete relative humidity should be less than 85% for concrete 14 days old or more. Contact KINGKRETE Technical Department for further details. | ASTM 2369 |
Standards & Approvals
Usage & Packaging
KingCoat SF100W is supplied in 20 kg (12.4 ltr) packs. KingCoat SF100W Primer and KingFloor WD are supplied in 5 kg packs.
KingCoat SF100W Primer: 45 - 52.5 m²/5 kg pack (undiluted)/coat to achieve 65 - 75 microns DFT. KingFloor WD: 30 m²/5 kg pack (undiluted)/coat to achieve 65 - 75 microns DFT. KingCoat SF100W: 0.8 kg/m2 to achieve 500 microns dry film thickness. 1.6 kg/m2
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack
Product family
High performance flexible epoxy polyurethane resin protective coating.
One component water based acrylic elastomeric protective anti carbonati…
Water based high performance acrylic protective and decorative coating.
Water based high performance acrylic protective and decorative coating …