KingGrout PG50®
High strength pourable epoxy resin grout.
Overview
KingGrout PG50 is a three component, high strength, free flowing, epoxy resin grout. KingGrout PG50 is suitable for grouting gaps with thicknesses between 10 - 150 mm at ambient temperatures between 10 - 40oC.
Applications
- KingGrout PG50 is ideally designed for use in the following applications:
- Machine base plates
- Heavy crane rails
- Pile top waterproofing
- Bearing plinths
- High speed turbines
- Grouting areas where occasional chemical spillage may occur
Advantages
- Resistant to dynamic loading
- Non-shrink and low creep characteristics under continuous loading
- Exceptionally high compressive, flexural and tensile strengths
- Extremely dense
- Exceptional bond to concrete and steel surfaces
- Good chemical resistance
- High early strength development allowing for rapid installation
- STANDARDS KingGrout PG50 complies with EN 1504, Part 3, Class R4 as concrete structural and non-structural repair material (based on epoxy resin)
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Property | , Class R4 requirements Test results | EN 1504-3 |
| Compressive strength | EN: ≥ 45 MPa @ 7 days ≥ 45 | — |
| 12190 | 1991 : MPa @ 1 day ≥ 90 MPa @ 2 days ≥ 100 MPa @ 7 days | ASTM C579 |
| Adhesive bond | EN: ≥ 2.0 MPa 4.2 MPa | — |
| 1542 | 1999 | — |
| Restrained shrinkage | EN: ≥ 2.0 MPa 4.3 MPa | — |
| 12617-4 | 2002 | — |
| Chloride ion content | EN: ≤ 0.05% 0% | — |
| 1015-17 | 2000 | — |
| Fire rating | - Class F, s3, d2 | EN 13501-1:2009 |
| Capillary absorption | EN: ≤ 0.5 kg/m². h-0.5 1.15 x | — |
| 13057 | 2002: 10-3 kg/m2.h-0.5 | — |
| Flexural strength | ASTM: - ≥ 28 MPa C580 | — |
| Tensile strength | - ≥ 12 MPa | ASTM C307 |
| Peak exothermic | - 42ºC @35ºC 50ºC | — |
| temperature | @40ºC | ASTM D2471 |
| Working time | - 100 - 120 min @25ºC 50 - 70 min @35ºC | — |
| VOC | : - < 20 g/ltr (complies with LEED) | ASTM D2369 |
| Minimum thickness | Minimum 10 mm @ 10ºC 150 mm @ | — |
| thickness | 40ºC | — |
Standards & Approvals
Usage & Packaging
KingGrout PG50 is available in 20, 30 kg and 100 kg packs. KingGrout PG50 can be applied in a single layer at thicknesses between 10 - 150 mm. For thicknesses greater than 150 mm: Multiple layers can be applied after initial curing of the previous layer.
Approximately 10 litre per 20 kg pack, 15 litre per 30 kg pack and 50 litre/100 kg pack.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Can
Product family
Epoxy acrylate resin cartridge system for anchoring.
Epoxy acrylate anchoring system in crack and uncracked concrete under s…
High strength pourable epoxy foundation resin grout.
Pump applied, non-sagging cementitious joint filler for vertical joints…