Grouts & Anchors Systems

KingGrout PG100^®

High strength fast flow epoxy resin grout.

⬇ Download TDS Request a Quote →

Adhesive bond

EN: ≥ 2.0 MPa ≥ 4 MPa

Restrained shrinkage

EN: ≥ 2.0 MPa ≥ 4 MPa

Chloride ion content

EN: ≤ 0.05% 0%

Flexural strength

ASTM: - ≥ 28 MPa C580

Coverage

10.25 litre/20 kg p…

Packaging

Pack

Overview

KingGrout PG100 is a three component, high strength, free fast flowing, epoxy resin grout. KingGrout PG100 is suitable for grouting gaps with thicknesses between 10-40 mm at ambient temperatures between 10 to 40oC.

Applications

KingGrout PG100 is ideally designed for use in the following applications:
Machine base plates
Heavy crane rails
Pile top waterproofing
Bearing plinths
High speed turbines
Grouting areas where occasional chemical spillage may occur

Advantages

Resistant to dynamic loading
Non-shrink and low creep characteristics under continuous loading
Exceptionally high compressive, flexural and tensile strengths
Extremely dense
Exceptional bond to concrete and steel surfaces
Good chemical resistance
High early strength development allowing for rapid installation
STANDARDS KingGrout PG100 complies with EN 1504, Part 3, Class R4 as concrete structural and non-structural repair material (based on epoxy resin)

Technical Properties

Property	Value	Standard
Property	, Class R4 requirements Test results	EN 1504-3
Compressive strength	EN: ≥ 45 MPa @ 7 days ≥ 90	—
12190	1991 : MPa @ 7 days	ASTM C579
Adhesive bond	EN: ≥ 2.0 MPa ≥ 4 MPa	—
1542	1999	—
Restrained shrinkage	EN: ≥ 2.0 MPa ≥ 4 MPa	—
12617-4	2002	—
Chloride ion content	EN: ≤ 0.05% 0%	—
1015-17	2000	—
Capillary absorption	EN: ≤ 0.5 kg/m². h-0.5 ≤ 3 x	—
13057	2002: 10-3 kg/m2. h-0.5	—
Flexural strength	ASTM: - ≥ 28 MPa C580	—
Tensile strength	- ≥ 12 MPa	ASTM C307
Peak exothermic	- 47ºC @40ºC	—
temperature		ASTM D2471
Working time	- 100 - 130 min @25ºC	—
VOC	: - < 10 g/ltr (complies with LEED)	ASTM D2369