KingFloor PUMD®
Medium to heavy duty flow applied polyurethane topping.
Overview
KingFloor PUMD is a three-pack water based polyurethane topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive matt finish. It is designed for medium to heavy duty food and chemical processing areas, dairies, breweries, etc. KingFloor PUMD is flow applied by trowel to horizontal surfaces and has very good durability towards pedestrian and vehicular traffic. It also has very good resistance to many of the chemicals commonly found in an industrial environment (consult our Technical Department for further details). KingFloor PUMD can be supplied in a variety of colours (consult our Sales Department for further details).
Advantages
- Resistant to thermal shock and temperatures between −15oC to 80oC at 6 mm thickness
- Provides hygienic floor
- Easy to clean
- Resistant to a wide range of chemicals (consult KINGKRETE Technical Department for more details)
- Hard wearing and good impact resistance
- Slip resistant
- CHEMICAL RESISTANCE KingFloor PUMD provides resistance to a wide range of chemicals commonly encountered in the food and pharmaceutical industries, these chemicals include:
- Acetic Acid (50%): found in spirit vinegar Lactic Acid (10%) @ 60°C: found in milk and dairy products Oleic Acid (100%) @ 60°C: used in food processing as an emulsifier Citric Acid (25%): found in fruits Methanol (100%): representative of alcohols and a range of solvents used in pharmaceuticals
- KingFloor PUMD is also resistant to a wide range of inorganic acids, mineral oils, fats, fuels and solvents
- Please contact KINGKRETE Technical Department for advice
- Note: Some staining and discoloration may occur upon contact with certain chemicals, depending on the exposure time, nature and housekeeping regime employed. This will not adversely affect the performance of the product
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Mixed density | 1.7 ± 0.05 g/cm3 | — |
| Pot life | 20 - 30 min | — |
| Bond strength | > 2 MPa | ASTM D4541 |
| Compressive strength | BS: > 48 MPa @ 28 days 6319-2 | — |
| Flexural strength | , > 15 MPa @ 28 days Part 3 | BS 6319 |
| Tensile strength | > 6 MPa @ 28 days | BS 6319-7 |
| Taber abrasion | 1200 milligram 75 | ASTM D4060 |
| (1000 g, 1000 cycle) H22 | milligram wheel H17 Wheel | — |
| Shore D hardness | ASTM: > 80 D2240 | — |
| Temperature resistance | −15oC to 80oC @ 6 mm thickness | — |
Standards & Approvals
Usage & Packaging
KingFloor PUMD is available in 19 kg (11.2 litre). 4 - 6 mm.
Approximately 2.8 m²/ kit at 4 mm thickness.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack