KingFloor PU Seal®
High build PU coating for floor surfaces.
Overview
KingFloor PU Seal is a two components solvent free modified polyurethane-based high-build flexible coating that provides floor surfaces with a seamless, hard wearing hygienic and cosmetically attractive finish. KingFloor PU Seal is applied by brush or roller and has very good durability towards pedestrian and vehicular traffic. It also has very good resistance towards many of the chemicals commonly found in an industrial environment. (See the chemical resistance table). KingFloor PU Seal can be supplied in a variety of colors and slip resistant finishes can be produced for every demanding situations.
Advantages
- Excellent chemical resistance
- Resistant to de-icing
- Semi-flexible, can bridge minor cracks
- Water tight
- Comes in a variety of standard colors
- UV resistant. Sligh color change may occur under direct sunlight without affecting the performance
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Mixed density | 1.4 gm/ cm³ | — |
| Over coating time | (when 2 Within 24 hrs. coats are needed) | — |
| Pot life | ≈ 120 mins. | — |
| Initial cure | 24 hrs. | — |
| Full cure | 7 days | — |
| Compressive strength | > 50 MPa | — |
| BS6319, Part 2 | 1983 | — |
| Flexural strength | , > 30 MPa | BS6319 |
| Part 3 | 1990 | — |
| Tensile strength | ,: > 12 MPa | BS6319 |
| Part 7 | 1985 | — |
| Water absorption | ASTM: < 1% D570 | — |
Standards & Approvals
Usage & Packaging
KingFloor PU Seal Primer is available in 5 kg packs. KingFloor PU Seal is available in 5 kg packs (3.6 liters) and 15 kg packs (10.7 liters). Antislip Aggregates is available in 25 kg bags.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bag