KingFloor PU1000T®
Heavy duty modified epoxy polyurethane system topping for floor surfaces.
Overview
KingFloor PU1000T is a solvent free, modified epoxy polyurethane system based topping that provides floor surfaces with a hygienic and cosmetically attractive finish. KingFloor PU1000T is applied by trowel and can be coved and laid to falls. KingFloor PU1000T has excellent durability when subjected to pedestrian and vehicular traffic. It also has very good resistance for a wide range of chemicals, commonly found in industrial environments (consult our Technical department for further details). KingFloor PU1000T finish provides a very good slip resistant floor, and can be supplied in a variety of colours (consult our Sales Department for details).
Applications
- KingFloor PU1000T is used to provide a hygienic, dense and extremely hard wearing surface for concrete floors for a wide range of applications such as:
- Heavy industry factories
- Paint workshops
- Steel works
- Dairies
- Chemical factories
- Oil refineries
Advantages
- Hard wearing
- Solvent free
- Hygienic and non-tainting
- Will not support bacterial growth
- Easy to clean when sealed
- Thermal shock resistant
- Resistant to temperatures between -40ºC and 120ºC
- Able to withstand steam and hot water cleaning
- Conforms to FDA CFR 21, 175 for food contact
- Non-slip
- Available in a wide range of attractive colours
- Resistant to a wide range of chemicals, consult KINGKRETE technical department for more details
- STANDARDS KingFloor PU1000T complies with EN 13813, SR-B2.0- AR0.5-IR10
- For KingFloor PU1000T for floor surfaces
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Density | 1.9 ± 0.1 g/cm3 | — |
| Compressive strength | BS: ≥ 90 MPa @ 7 days 6319-2 | — |
| Flexural strength | EN: ≥ 30 MPa @ 7 days 13892-2 | — |
| Tensile strength | ≥ 15 MPa @ 7 days | BS 6319-7 |
| Bond strength on C25/30 | ≥ 2 MPa @ 7 days | — |
| concrete | ASTM D 4541 EN (concrete failure) 13892-8 | — |
| Abrasion resistance | ASTM ≤ 35 milligram D4060 (1000 cycle, 1000 g) CS-17 | — |
| Maximum wear depth | BS EN 0.01 mm 13892-4 | — |
| Impact resistance | ISO: Pass @ 10 N.m 6272-2 | — |
| Water absorption | Nil | — |
| Pot life | 30 - 50 min | — |
| Foot traffic | After 24 hr | — |
| Vehicular traffic | After 5 days | — |
| Chemical curing | 7 days | — |
| VOC | : < 20 g/ltr (complies with LEED) | ASTM D2369 |
| Technical Properties @ 250C | For KingFloor PU1000T Seal | — |
| Density | 1.15 ± 0.05 g/cm3 | — |
| Pot life | 30 - 50 min Bond strength to KingFloor ≥ 2 MPa | — |
| PU1000T | — | |
| Maximum wear depth | BS EN 0.02 mm over KingFloor | — |
| 13892-4 | PU1000T | — |
| Technical Properties @ 250C | For KingFloor PU1000T Primer | — |
| Density | 1.10 ± 0.05 g/cm3 | — |
| Pot life | 80 - 120 min | — |
| Over coating time | 12 - 24 hr | — |
| VOC | : ≤ 30 g/ltr TEMPERATURE RESISTANCE AND THICKNESS RANGE KingFloor® PU1000T Heavy duty modified epoxy polyurethane system topping A 5 mm thickness of KingFloor PU1000T is able to withstand liquid spillage up to 60oC and cold temperature down to -15oC. A 9 mm thickness and above of KingFloor PU1000T is able to withstand liquid splillage up to 120oC and cold temperature down to -40oC. | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingFloor PU1000T is available in 30 kg packs. KingFloor PU1000T Primer is available in 5 kg packs. KingFloor PU1000T Seal is available in 5 kg packs.
KingFloor PU1000T: Approximately 3.1 m²/kit @ 5 mm thick. KingFloor PU1000T Primer: 4.5 m²/kg per one layer to provide 200 micron DFT. KingFloor PU1000T Seal: 4 - 5 m²/ kg per one layer to provide 180- 200 microns DFT.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack