Flooring Systems
KingFloor PA250®
High solids epoxy polyamide coating.
Mixed density
1.25 ± 0.05 g/cm3
Solid content
70 ± 2%
Volume solids
56 ± 2%
Pot life
180 - 200 min @ 25°C
Coverage
4.5 m²/kg per coat …
Packaging
Pack
Overview
KingFloor PA250 is a high solids epoxy polyamide coating for use over well prepared steel, concrete and previously coated surfaces. The product has excellent adhesion properties and good flexibility and resistance to abrasion and chemicals.
Applications
- KingFloor PA250 is designed for use directly on metal substrates in high performance architectural applications and on primed substrates for many applications in industrial environments such as:
- Institutional, industrial, commercial, and laboratories walls
- Metal structures
- Chemical processing equipment
- Food and chemical industries, laundries and power plants
- Exterior protection of pipes and tanks
Advantages
- High chemical and mechanical resistance
- Excellent adhesion to concrete and steel surfaces
- High abrasion, wear and impact resistance
- Good flexibility, suitable for low temperature exposure conditions
- Cost effective
- Easy application
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Wide range of colours | — |
| Finish | Gloss | — |
| Mixed density | 1.25 ± 0.05 g/cm3 | — |
| Solid content | 70 ± 2% | — |
| Volume solids | 56 ± 2% | — |
| Pot life | 180 - 200 min @ 25°C | — |
| Tack free time | 3 - 4 hr @ 25°C | — |
| Dry time, dry hard | ASTM: 1 - 2 hr @ 25°C D1640 | — |
| Dry film thickness | 65 - 100 microns per coat | — |
| Minimum over coating time | 4 hr @ 25°C | — |
| Maximum over coating time | 7 days @ 25°C | — |
| Minimum application | 10°C | — |
| temperature | — | |
| Full cure | 7 days @ 25°C | — |
| Bond strength | ≥ 7 MPa (concrete failure) ≥ 7 MPa (on steel) | ASTM D4541 |
| Impact resistance | ASTM: 10 N.m D2794 | — |
| Flexibility | , 180° Passes bend, 1/4" mandrel | ASTM D522 |
| Pencil Hardness | F-H: Passes according to | ASTM D3363 |
| Taber abrasion resistance | 80 mg @ 14 days (1000 g, 1000 cycle) , weight Loss CS17 wheel | ASTM D4060 |
| Dry heat resistance | 93°C (No loss of adhesion was observed @ 180° bend, 5/8" (16 mm) mandrel | — |
| VOC | : < 450 g/ltr | ASTM D2369 |
| Concrete | Highly porous concrete surfaces should be primed with KingFloor Primer S. | — |
Standards & Approvals
ASTM
ASTM D2369
ASTM
ASTM D3363
ASTM
ASTM D4060
ASTM
ASTM D4541
ASTM
ASTM D522
ISO
ISO 9001 · 14001 · 45001Quality & EHS
Usage & Packaging
Packaging
KingFloor PA250 is available in 5 kg packs (4 litre) and 20 kg packs (16 litre).
Coverage
4.5 m²/kg per coat to achieve 100 microns dry film thickness. Two coats should be applied to achieve 150 to 200 microns dry film thickness.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack formats
Pack
Product family
Part of the KingFloor range