KingFloor EP75®
Solvent free high build epoxy floor coating for thickness up to 200 microns in one coat.
Overview
KingFloor EP75 is a high build, hard wearing, solvent free epoxy resin coating, designed to provide a hard, gloss coating to concrete floors. It is supplied as base (resin) and hardener in addition to a colour pack which contains reactive ingredients in preweighed quantities ready for on site mixing and use. KingFloor EP75 permits the application of floor coatings of 200 microns per coat and can be coloured to suit site requirements. With the addition of Anti-slip Aggregate (Slip resistant aggregate) between coats, slip resistant floor system can be achieved with a build-up thickness between 1 to 2 mm.
Applications
- KingFloor EP75 is used as protective, decorative, high chemical resistance and hard wearing floor coating system for a wide range of applications including:
- Aircraft hangars
- Car parks
- Soft drink and beverage production areas
- Dairies production areas
- Show rooms
- Production, maintenance and assembly areas
- Warehouses
- General food processing and manufacturing plants
Advantages
- High chemical and mechanical resistance
- Available in a wide range of attractive colours
- Cost effective
- Easy application
- High build
- Can be applied in slip resistant finishes
- STANDARDS KingFloor EP75 complies with BS 476, Part 7 : 1987, Class 1 Spread of Flame
- up to 200 microns in one coat
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Available in different colours | — |
| Mixed density | 1.60 ± 0.05 g/cm³ @ 25°C | — |
| Solid contents | 100% | — |
| Pot life | 50 min @ 25°C 25 min @ 35°C | — |
| Minimum time between coats | 12 hr @ 25°C 6 hr @ 35°C | — |
| Maximum time between | 36 hr @ 25°C 18 hr @ | — |
| coats | 35°C | — |
| Full curing time | 7 days @ 25°C 5 days @ 35°C | — |
| Compressive strength | BS: 70 MPa @ 25°C | — |
| 6319, Part 2 | 1983 | — |
| Flexural strength | , > 45 MPa @ 25°C | BS 6319 |
| Part 3 | 1990 | — |
| Tensile strength | > 20 MPa @ 25°C | ASTM D638 |
| Bond strength | ASTM: 2.5 MPa (concrete failure) D4541-85 | — |
| Impact resistance | ASTM: 10 N.m D2794 (on primed substrate) | — |
| Shore D hardness @14 days | 85 | ASTM D2240 |
| Water absorption | ASTM: < 0.1% D570 | — |
| Taber abrasion resistance | 90 milligram (1000 g, 1000 cycle) , weight loss, CS17 wheel | ASTM D4060 |
| VOC | : < 20 g/ltr (complies with LEED) | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingFloor EP75 is available in 6 kg packs (3.75 litre) and in 18 kg packs (11.25 litre).
Standard coverage: KingFloor Primer S: 5 m²/kg. KingFloor EP75(base coat): 0.32 kg/m². KingFloor EP75 (top coat): 0.32 kg/m². Approximate system thickness: 500 - 600 microns. Anti-slip coverage When used with Anti-slip Aggregate #2 to achieve medium textu
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack