KingFloor EP50T®
Heavy duty epoxy topping for floor surfaces.
Overview
KingFloor EP50T is a three-pack solvent free, epoxy- based topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive finish. KingFloor EP50T is applied by trowel and can be coved and laid to falls and has a very good durability towards pedestrian and vehicular traffic. It also has very good resistance towards many of the chemicals commonly found in an industrial environment (consult our Technical department for further details). KingFloor EP50T has a finish that provides very good slip resistance and can be supplied in a natural colour and variety of colours, it is also available in a decorative quartz finish (consult our Sales Department for details).
Applications
- KingFloor EP50T is used to provide a hygienic, dense and extremely hard wearing surface for concrete floors for a wide range of applications such as:
- Heavy industry factories
- Aircraft hangars
- Paint workshops
- Steel works
- Dairies
- Chemical factories
- Oil refineries
- Freezers and refrigerated storage with temperatures down to -25˚C (consult KINGKRETE's technical department for more details)
Advantages
- Extremely hard wearing system
- Solvent free
- Non-slip
- Available in a wide range of attractive colours
- Available in a decorative quartz finish
- Resist a wide range of chemicals, consult KINGKRETE technical department for more details
- STANDARDS KingFloor EP50T complies with EN 13813, SR-B2.0- AR0.5-IR10
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Mixed density | 2.10 ± 0.05 g/cm3 | — |
| Pot life | 1 hr | — |
| Compressive strength | BS: ≥ 85 MPa @ 7 days 6319, Part 2 | ASTM C579 |
| Flexural strength | , ≥ 30 MPa @ 7 days Part 3 EN 13892-2 | BS 6319 |
| Tensile strength | ,: ≥ 15 MPa @ 7 days Part 7 | BS 6319 |
| Shore D hardness | ASTM: ≥ 80 @ 7 days D2240 | — |
| Foot traffic | After 24 hr | — |
| Vehicular traffic | After 72 hr | — |
| Chemical curing | 7 days | — |
| Bond strength on C35/40 | ≥ 3.5 MPa @ 7 days | — |
| concrete | : (substrate failure) | ASTM D4541 |
| Maximum wear depth | BS EN 0.03 mm 13892-4 | — |
| Impact resistance | ISO: > 20 N.m 6272-2 | — |
| VOC | ≤ 20 g/ltr | — |
Standards & Approvals
Usage & Packaging
KingFloor EP50T "natural" is available in 29.35 kg packs (14.7 litre). KingFloor EP50T "coloured" is available in 30 kg packs (15 litre) including colour pack. KingFloor Primer is available in 5 kg packs. 5 mm and above.
KingFloor EP50T: Approximately 3 m²/kit @ 5 mm thick. KingFloor Primer: 5 m²/kg.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack