KingFloor EP400®
Solvent free high build epoxy floor coating for 200 to 400 microns thickness.
Overview
KingFloor EP400 is a high build, hard wearing, solvent free epoxy resin coating, designed to provide a hard and glossy coating to concrete floors. It is supplied as a coloured base (resin) and hardener in pre-weighted quantities ready for onsite mixing and use. KingFloor EP400 permits the application of floor coatings at 200 - 400 microns per coat and can be supplied in different colours to suit the site requirements. With the addition of Anti-slip Aggregate (Slip resistant aggregate) between coats, slip resistant floor system can be achieved with a build up thickness between 1.3 - 2.0 mm.
Applications
- KingFloor EP400 is used as protective, decorative, high chemical resistance and hard wearing floor coating system for a wide range of applications including:
- Aircraft hangars
- Car parks
- Soft drink and beverage production areas
- Dairies production areas
- Show rooms
- Production, maintenance and assembly areas
- Warehouses
- General food processing and manufacturing plants
Advantages
- High chemical and mechanical resistance
- Available in a wide range of attractive colours
- Cost effective
- Easy application
- High build
- Can be applied from 200 - 400 microns thickness per coat
- Can be applied in slip resistant finishes
- STANDARDS KingFloor EP400 complies with BS 476, Part 7:1987, Class 1 Spread of Flame
- 400 microns thickness
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Available in different colours | — |
| Mixed density | 1.5 ± 0.1 g/cm³ | — |
| Solid contents | 100% | — |
| Pot life | 60 - 80 min @ 25°C 30 - 50 min @ 35°C | — |
| Minimum time between coats | 12 hr @ 25°C 6 hr @ 35°C | — |
| Maximum time between | 36 hr @ 25°C 18 hr @ | — |
| coats | 35°C | — |
| Full curing time | 7 days @ 25°C 5 days @ 35°C | — |
| Compressive strength | BS: ≥ 70 MPa @ 7 days 6319-2 | — |
| Flexural strength | EN: ≥ 40 MPa @ 7 days 13892-2 | — |
| Tensile strength | ≥ 14 MPa @ 7 days | BS 6319-7 |
| Bond strength on C25/30 | ≥ 2.0 MPa @ 7 days | — |
| concrete | EN (concrete failure) 1542 | ASTM D4541 |
| Water absorption | ASTM: < 0.25% D570 | — |
| Taber abrasion resistance | ≤ 60 milligram (1000 g, 1000 cycle) , weight loss CS17 wheel | ASTM D4060 |
| VOC | : ≤ 10 g/ltr (complies with LEED) | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingFloor EP400 is available in 27 kg packs (18 litre).
Standard coverage: 400 microns thickness. KingFloor Primer S: 5 m²/kg. KingFloor EP400 (base coat): 0.30 kg/m². KingFloor EP400 (top coat): 0.30 kg/m². Approximate system thickness: 400 - 600 microns. Anti-slip coverage When used with Anti-slip Aggregate
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack