KingFloor SL600®
Self-leveling topping for floor surfaces
Overview
KingFloor SL600 is a solvent free, epoxy-based self- leveling topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive finish. KingFloor SL600 is applied by trowel to horizontal surfaces and has very good durability towards pedestrian and vehicular traffic. It also has very good resistance to many of the chemicals commonly found in an industrial environment (consult our Technical Department for further details). It can be supplied in a variety of colours (consult our Sales Department for details). KingFloor SL600 cures to a durable, hard wearing surface.
Applications
- KingFloor SL600 is used to provide a hygienic, dense and hard wearing surface for concrete floors for a wide range of applications such as:
- Aircraft hangars
- Hospitals
- Pharmaceutical factories
- Showrooms
- Laboratories
- Heavy or light duty industrial plants
- Kitchens
Advantages
- Provides hygienic floor
- Hard wearing system
- Solvent free
- Available in a wide range of attractive colours
- Resist a wide range of chemicals, consult KINGKRETE technical department for more details
- STANDARDS KingFloor SL600 complies with EN 13813, SR-B2.0- AR0.5- IR9.0
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Compressive strength | BS: ≥ 85 MPa @ 7 days 6319, Part 2 | — |
| Flexural strength | , ≥ 38 MPa @ 7 days Part 3 | BS 6319 |
| Tensile strength | ,: ≥ 15 MPa @ 7 days Part 7 | BS 6319 |
| Pot life | 45 - 60 min | — |
| Foot traffic | After 24 hr | — |
| Vehicular traffic | After 48 hr | — |
| Chemical curing | 7 days | — |
| Mixed density | 1.75 ± 0.1 g/cm³ | — |
| Taber abrasion resistance | 400 milligram 80 milligram (1000 g, 1000 cycle) , weight loss H22 wheel CS17 wheel | ASTM D4060 |
| Maximum wear depth | BS EN 0.01 mm 13892-4 | — |
| Impact resistance | ISO: 9.0 N.m 6272-2 | — |
| Bond Strength | BS EN: ≥ 2 MPa 13892-8 | — |
| VOC | : < 30 gr/ltr (complies with LEED) 25 N/mm² and a maximum concrete relative humidity of 80% (max. moisture content of 4%), relative humidity can be measured by using hygrometers. Concrete relative humidity should be less than 80% for concrete of 28 days old or more. Contact KINGKRETE Technical Department for further details. | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingFloor SL600 is available in 27 kg packs (15 litre). KingFloor Primer S is available in 5 kg packs. 3.5 - 6.0 mm.
KingFloor SL600: Approximately 3.75 m²/kit @ 4 mm thick. KingFloor Primer S: Approximately 5 m²/kg. Actual coverage can vary depending on the substrate conditions.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack