Waterproofing Systems
KingSwell 3030®
Hydrophilic Waterstop for Expansion Joint.
Tensile strength
25 kg/ cm² above
Elongation
550% above
Expansion volume
150% above
Packaging
Roll/Strip
Overview
KingSwell 3030 is a chemically modified natural rubber product with an embedded stainless steel wire mesh. A patented process chemically binds a hydrophilic agent to the rubber. DP-3030N stops water by compression from rubber’s natural resilience and moisture induced expansion. DP-3030N will fill any void within the limits of its expansion capability. This is a vulcanized product. It has high tensile and compressive strength.
Applications
- KingSwell 3030 can be used in expansion joints. This product is an excellent waterstop for use shear movement joints
- METHOD OF INSTALLATION Remove any dirt or loose debris from the surface of the concrete. Adhere DP-3030N by using screws, rubber adhesive or Hilti. Construction adhesive depending on choice and site conditions
- For added assurance or in the case of rough concrete, apply a bead of DPS-200 before placing DP-3030N
- Another option is to place a small bead of DPS-200 on both sides of the DP-3030N. Do not allow any gaps between DP-3030N and the concrete. Screw must be perpendicular to the stainless steel wire mesh
- TYPICAL INSTALLATION
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Black | — |
| Hardness (HS) | 45 ± 10 | — |
| Tensile strength | 25 kg/ cm² above | — |
| Elongation | 550% above | — |
| Specific gravity | 1.1 above | — |
| Expansion volume | 150% above | — |
| Vulcanization | Yes | — |
Usage & Packaging
Packaging
10 m/ roll, 2 rolls/ box. Size: 30 mm x 30 mm.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack formats
Roll/Strip, Carton/Box