KingStop 40®
High quality PVC waterstops.
Overview
KingStop 40 is extruded from high quality elastomeric polyvinyl chloride rubber. KingStop 40 is designed in precision engineered profiles to stop any possible leakage from construction, contraction and expansion joints in cast-in-place concrete elements. KingStop 40 is produced in two profile ranges; one used for internal fixing and the other for external fixing. Both profiles can used in combination as an integrated system suitable for use in water retaining and water excluding structures. Internal fixing profiles have brass eyelets enabling the waterstop to be tied to the reinforcement for support during concreting. External fixing profiles can be fixed by using nails onto the form work or onto the blinding concrete.
Applications
- KingStop 40 is suitable for use in construction, contraction and expansion concrete joints in the following structures:
- Water reservoirs
- Waste water treatment plants
- Storage tanks
- Retaining walls, foundations, basements and suspended slabs
- Swimming pools
- Subways, tunnels and culverts
- Canals, pumping stations and underground chambers
- Foundations, basements and suspended slabs
- PVC waterproofing compartment systems
Advantages
- Unique profile design with multiple ribs
- Has no effect on the quality of potable water
- Brass eyelets for more rigidity while concreting
- Hollow center bulb for expansion joints to accommodate movement
- Prefabricated junction pieces
- Easy to join on site
- Resistant to wide diluted chemicals including hydrocarbons
- STANDARDS KingStop 40 complies with BS 2782, and U. S. Corps of Engineers CRD- C 572-74 for the following properties:
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Tensile strength | ≥ 15.0 MPa | — |
| Elongation at break | > 350 % METHOD OF INSTALLATION KingStop 40 fixed inside the shutter should be tied by wire to the reinforcement through the eyelets in the edge flanges. KingStop 40 fixed external should be fixed before concreting with nails to the concrete blinding and vertical shutters through the edge flanges. SITE WELDING The key to a leak free waterstop network is correct on- site jointing. KingStop 40 is made of thermoplastic PVC, and can be easily welded using suitable heating processes, such as welding knife. Cut the edges to be welded in a sharp and straight line then secure the ends in a welding jig. Use the welding knife between the ends, until an even, molten bead appears. Remove the welding knife and press the ends firmly together. Consult KINGKRETE technical departments for further details. JUNCTION PIECES Full range of factory made junction pieces are available for | — |
| all profiles, for the following | Flat and vertical cross. Flat and vertical T. Corner pieces. Flat L. Other non-standard pieces can be made as may be required by project shop drawings. | — |
Usage & Packaging
Internal fixing profiles are supplied in 15 meter rolls. External fixing profiles are supplied in 15 meter rolls.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Roll/Strip