KingFloor WC100®
Solvent free flexible two component polyurethane floor coating.
Overview
KingFloor WC100 is a solvent free flexible two component polyurethane based floor coating; it provides a fairly smooth surface. It has excellent resistance to petrol, battery acid, diesel, brake fluid, de-icing salts, etc. Other applications include walkways, balconies, etc. KingFloor WC100 is formulated for easy application by roller or brush with excellent resistance to abrasion and chemical attack. KingFloor WC100 is available in two types: KingFloor WC100 TG for indoor applications. KingFloor WC100 Plus for outdoor applications which is specifically formulated for colour stability and will not discolour on exposure to sunlight or UV light. It is available in a wide range of colours. KingFloor WC100 can be supplied in a variety of colors and slip resistant finishes and can be produced for every demanding situation.
Applications
- Designed for interior use (KingFloor WC100 TG) and exterior use (KingFloor WC100 Plus) in parking and public places such as:
- Car parks, traffic aisles and parking bays
- Restaurants, hotels, and reception areas
- Schools, colleges, and universities
- Sports halls, gymnasiums and ramps
- Retail environments and many more
Advantages
- Excellent chemical resistance
- Excellent resistant to petrol, battery acid, diesel and brake fluid
- Resistant to de-icing
- Flexible, can bridge minor cracks
- UV resistant (KingFloor WC100 Plus)
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Wearcoat TG Wearcoat Plus | ||
| Appearance | Smooth gloss finish | — |
| Colour | Wide range of colours | — |
| Mixed density | 1.60 ± 0.02 g/cm3 1.35 ± 0.02 g/cm3 | — |
| Volume solids | 100% | — |
| Mixing ratio | By weight: B 82 : H 18 B 67 : H 33 | — |
| Working time | 60 min 20 min | — |
| Tack-free time | 4 hr 8 hr | — |
| Maximum overcoat time | 24 hr 30 hr | — |
| Full cure | 7 days | — |
| Adhesion to concrete | > 1 MPa (Substrate failure) | — |
| Adhesion to asphalt | > 1 MPa (Substrate failure) | — |
| Tensile strength | 10 MPa 9 MPa | — |
| Shore D hardness | 80 60 | — |
| Application temperature | Do not apply if the ambient or floor temperature is to fall below 5⁰C during the first 24 hours or if rain or condensation is likely Concrete floors must have a minimum compressive strength of 25 N/mm² and a maximum concrete relative humidity of 70% (max. moisture content of 3%), relative humidity can be measured using a hygrometer. Concrete relative humidity should be less than 70% for concrete 28 days old or more. | — |
Usage & Packaging
KingFloor WC100 TG is available in 5 and 15 kg packs. KingFloor WC100 Plus is available in 5 and 15 kg packs.
Smooth finish coverage (500 - 600 microns) KingFloor Primer: 0.25 - 0.30 kg/m²/coat. Wearcoat TG: 0.33 kg/m²/coat. or Wearcoat Plus: 0.28 kg/m²/coat. Antislip coverage with Antislip Aggregate #3 (0.9 - 1 mm) KingFloor Primer: 0.25 - 0.30 kg/m²/coat. Antis
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack