KingSeal PP150®
Elastomeric high performance cold applied fuel resistant pavement joint sealant
Overview
KingSeal PP150 is a two component, chemical curing, cold applied, fuel and oil resistant pitch polyurethane sealant designed for use in all types of concrete pavement joints and has excellent adhesion properties to asphalt substrates. KingSeal PP150 is also available in a fast curing grade, called KingSeal PP150F.
Applications
- For sealing all types of joints in airport runways and aprons
- For sealing all types of joints in car parks, and traffic decks
- For sealing of all types of joints in warehouses, oil terminals, docks and harbours
- For sealing all types of joints in sewage treatment plants
- Suitable for horizontal joints only
Advantages
- Cold applied, chemical curing sealant
- Suitable for all climate conditions, weathering and UV resistant
- Fuel and oil resistant
- Excellent movement accommodation in butt and lap joints
- Pourable and self-leveling
- Good chemical resistance to a wide range of mild alkalis, diluted acids and solvents
- STANDARDS British standard 5212:1990, Type N, F and FB. US Federal Specification SS-S-200E:1984 as Type H sealant
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Shore A hardness | ASTM: 25 ± 5 D2240 | — |
| Solid content | 100% | — |
| Movement accommodation | 25% for butt joints 50% for lap joints | — |
| Mixed density | 1.35 ± 0.05 g/cm3 | — |
| Application temperature | 5 to 50oC | — |
| Pot life | 90 - 100 min @ 25oC | — |
| Elongation at break | ASTM ≥ 550% D412, Die C | — |
| Tensile strength | , ≥ 1.4 MPa Die C | ASTM D412 |
| Curing type | Chemical cure | — |
| Tack free time | < 5 - 6 hr @ 25oC | ASTM C679 |
| Service temperature | -20 to 90°C | — |
| VOC | : < 80 g/ltr | ASTM D2369 |
| Note | The material can be still tacky for longer periods at low temperatures and low humidity CHEMICAL RESISTANCE (Repeated spillage) | — |
| Brake Fluid | Resistant | — |
| Jet fuel | Resistant | — |
| Diesel | Resistant | — |
| Kerosene | Resistant | — |
| White spirit | Resistant | — |
| Petrol | Resistant | — |
| Xylene | Resistant | — |
| Oleic acid | Resistant | — |
| Hydraulic oils | Resistant | — |
| Dilute acids | Resistant | — |
| Mineral oils | Resistant Care should be taken to ensure not puncturing the backer rod during installation as puncture in the backer rod might create bubbling. KingSeal® PP150 Elastomeric high performance cold applied fuel resistant | — |
Standards & Approvals
Usage & Packaging
KingSeal PP150 is available in 5.2 kg (4 litre) & 23.4 kg (18 litre) packs. KingSeal Primer PU is available in 0.46 kg (500 ml) tin. Flexprime PU: 500 ml of Flexprime PU will be sufficient for a joint length of approximately 125 m. 50 mm (maximum in traff
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Cartridge/Tube, Tin