Joint Sealing Systems
KingSeal EP100®
Two-part hybrid epoxy sealant.
Working life
45 mins. @ 20°C
Application temperature
10 - 40°C
Packaging
Bulk/IBC
Standards
1 cited
BS8000
Overview
KingSeal EP100 is a two-part epoxy sealant, which when the components are mixed together, cures to form a hard wearing seal which is designed to accommodate a small degree of movement in tension but a considerable movement in compression.
Applications
- For sealing stress relief joints in tiled floors and swimming pools (can be applied underwater), internal sanitary applications for public/secure areas e.g. prisons
- Note: Not recommended for structural expansion joints or for use in an external situation
Advantages
- Tough yet flexible, excellent for use in trafficable areas
- Long service life expectancy
- High service temperature range
- Fast cure minimizing down time
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Off white & grey | — |
| Typical shore D hardness | 70 | — |
| Working life | 45 mins. @ 20°C | — |
| Application temperature | 10 - 40°C | — |
| Service temperature | - 20 - 90°C Intumesces at temperatures above 140°C | — |
| Cure rate | 48 hrs. @ 20°C. At colder temperatures the cure rate will be extended | — |
| UV resistance | Good | — |
| Service life | 20 + years (when used in trafficked areas or in special environments such as swimming pools, the life may be reduced) | — |
| Movement accommodation | 5% 50% In tension In compression into the joint by maintaining an even pressure on the trigger of the gun. All joint preparation, priming, and sealant application should be carried out in accordance with , Part 16, the British Standard for the sealing of joints in buildings using sealants. CHEMICAL RESISTANCE Resistant to most alkalis and dilute acids; petrol, diesel or jet fuel and most chemicals likely to be found in swimming pools or similar situations. | BS8000 |
Standards & Approvals
BS
BS8000
ISO
ISO 9001 · 14001 · 45001Quality & EHS
Usage & Packaging
Packaging
KingSeal EP100 is available in 1.2 liters packs (includes base and curing agent). SEALANT QUANTITY ESTIMATOR JOINT SIZE SUITABILITY Joint Width Minimum 6 mm. Maximum 20 mm (single application). Joint Depth Minimum 10 mm on porous substrates. Minimum 6 mm
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack formats
Bulk/IBC, Tin
Product family
Part of the KingSeal range