Grouts & Anchors Systems

KingGrout RE5^®

Epoxy resin cartridge system for anchoring.

⬇ Download TDS Request a Quote →

C882-99

MPa @ 14 days

Linear coefficient of

< 0.005 @ 7 days

Water absorption

ASTM: < 1% D570-98

Packaging

Cartridge/Tube

Standards

2 cited

ASTM D2566-86 · ASTM D695-02

Overview

KingGrout RE5 is a two component high strength pure epoxy resin anchoring grout pre-packed in dual cartridge system with fast curing rate. KingGrout RE5 is formulated for permanent installation of steel reinforcement bars and threaded rods into concrete substrates in structural applications.

Applications

KingGrout RE5 is ideally designed for use in the following Permanent installation of reinforcement starter bars and dowel bars
Permanent installation of hand rails, safety fence, wall ties, railway tracks and ground anchors

Advantages

Exceptional rapid strength development
Resistant to dynamic loading
Exceptional high compressive
Extremely dense
Exceptional bond to concrete and steel surfaces
Suitable for dry and damp concrete holes
Good chemical resistance
High ultimate and early strengths
STANDARDS KingGrout RE5 evaluated in accordance with the EOTA TR023 “Assessment of post-installed rebars connections”
KingGrout RE5 when tested at normal temperature complies with the requirements of ASTM C881, Types I, II*, IV and V*, Grade 3, Class C
*Except for gel time

Technical Properties

Property	Value	Standard
Colour	Red	—
Bond strength	ASTM: ≥ 10 MPa @ 2 days ≥ 13.5	—
C882-99	MPa @ 14 days	—
Compressive yield strength	≥ 70 MPa @ 7 days a	ASTM D695-02
Linear coefficient of	< 0.005 @ 7 days	—
shrinkage on cure		ASTM D2566-86
Compressive modulus	ASTM ≥ 1400 MPa @ 7 days D695	—
Elongation at break	ASTM > 1.5% @ 7 days D638-03	—
Water absorption	ASTM: < 1% D570-98	—