KingGrout AE5®
Epoxy acrylate anchoring system in crack and uncracked concrete under seismic conditions (C1)
Overview
KingGrout AE5 is high strength, fast cure, styrene free, epoxy acrylate resin anchoring grout supplied in a pre- packed cartridge system. It is suitable for use with different type of substrates such as cracked concrete, uncracked concrete, solid and hol- low masonry, hard natural stone, solid rock, voided stone or rock. KingGrout AE5 is available in three different grades depend- ing on the installation environment: KingGrout AE5: Standard grade KingGrout AE5 -T: for high-temperature environments KingGrout AE5 -W: for cold-temperature environments
Applications
- KingGrout AE5 is ideally designed for use in the following Structural applications in cracked and non-cracked concrete
- Permanent installation of reinforcing and starter bars
- Suspended ventilation systems
- Safety barriers
- Machinery and heavy machinery
- Racking Rolling cranes
Advantages
- Suitable for dry, wet and flooded holes
- Use standard sealant application gun
- Exceptional rapid strength development
- Styrene free
- Resistant to dynamic loading
- Exceptional bond to concrete and steel surfaces
- High ultimate and early strengths Low waste, reusable and easily recycled cartridge
- STANDARDS KingGrout AE5 complies with the following standards:
- ETA according ETAG 001, Part 5, Option 1 for anchoring of threaded bars into cracked and uncracked concrete, and under seismic conditions (C1)
- EOTA according to TR023 for post-installed rebar connections
- ETA according to ETAG029 for masonry installations
- WRAS - Approved Material
- Fire resistance F120 concrete under seismic conditions (C1)
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Compressive strength | ASTM ≥ 75 MPa @ 7 days D695 | — |
| Flexural strength | ASTM: ≥ 25 MPa @ 7 days D790 | — |
| Tensile strength | ≥ 12 MPa @ 7 days | ASTM D638 |
| Tensile modulus | ≥ 3500 MPa | ASTM D638 |
| Elongation at break | ASTM ≥ 5% @ 7 days D638 | — |
Standards & Approvals
Usage & Packaging
KingGrout AE5 is available in 300 ml.
Bonding agent: 16 m² when diluted 1 to 1. Sealer coat: 25m² when diluted 1 to 4. Admixture: 20 - 25 litre/100 kg Cement depending on use. Note: The coverage rate differs from surface to another depending on the porosity of the surface.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Cartridge/Tube
Product family
Epoxy acrylate resin cartridge system for anchoring.
High strength pourable epoxy foundation resin grout.
Pump applied, non-sagging cementitious joint filler for vertical joints…
General purpose non-shrink cementitious grout.