🌍 🌐 English
Concrete Repair & Strengthening Systems

KingRep PE100®

Two component polyester repair mortar.

Part 7
1985: 7 days
Pot life
20 min @ 20ºC
Coverage
1 kg pack yields 0.…
Packaging
Can
Standards
1 cited
BS6319

Overview

KingRep PE100 is a two components, high strength and fast setting repair and bedding mortar. It is designed for rapid repairs and as a fast curing adhesive. It is also used as re-profiling mortar for concrete, masonry, pre-cast concrete units and elements.

Applications

  • General concrete repair mortar
  • Bedding and fixing mortar for manhole sets and kerbstones
  • Bedding and fixing mortar for frames, brick slips, slabs and coping stones
  • As fast set repair mortar for pre-cast elements and units

Advantages

  • Fast curing, even at low temperatures
  • High strength development
  • Easty to use
  • Excellent adhesion to concrete
  • Easily shaped and placed
  • Very good chemical resistance
  • Resistance to water and weathering
  • High chemical and oil resistance
  • Pre-packed components ensure consistancy

Technical Properties

PropertyValueStandard
ColourConcrete grey
Specific gravity1.95 ± 0.05
Compressive strength @≥ 65 MPa @ 3 hr ≥ 75 MPa
25oC, Part 2 : 1983 @ 1 day ≥ 85 MPa @ 7 daysBS6319
Tensile strength,: 10 MPa @ 3 hr 11 MPa @BS6319
Part 71985: 7 days
Application temperature0 - 30oC
Service temperature-20 - 80oC
Pot life20 min @ 20ºC
Adhesion to concrete> 3 MPa (concrete failure)
Chemical resistanceExcellent to most diluted acids, alkalis, solvents, grease, oil, etc.

Standards & Approvals

BS
BS6319
ISO
ISO 9001 · 14001 · 45001Quality & EHS

Usage & Packaging

Packaging

KingRep PE100 is available in 1, 4 and 7.5 kg pack. KingRep PE100 can be applied at thicknesses between 1 mm - 25 mm for horizontal applications and up to 10 mm for vertical applications.

Coverage

1 kg pack yields 0.5 litres.

Storage

Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature

Pack formats

Can