KingHard MT50^®

KingHard MT50 is a non-oxidizing, chemically inert, Abrasion metallic dry shake floor topping for monolithic floors. The product contains a blend of specially graded aggregates, Compressive additives and Ordinary Cements. cure) When trowelled into freshly laid concrete, KingHard MT50 ASTM produces a dense, tough, abrasion resistant surface Bohme suitable for most industrial floors. The product is designed for application either by hand or using automatic spreading Hardsness equipment. Colour:

• Heavy industries
• Power stations
• Parking areas
• Warehouses
• Workshops
• Loading bays
• Service stations
• Aircraft hangars

• Dense surface resistant to oil and grease
• High resistance to wear and abrasion
• Easy to apply
• Non oxidizing floor hardener
• Premixed, ready to use
• Reduces surface dust
• BASE CONCRETE LIMITATIONS The following concrete limitations and properties should be considered to obtain hard concrete surface with high abrasion resistance:
• The compressive strength is recommended to be higher than 25 MPa
• TIMING W/C ratio should be at a minimum required value to Timing achieve fully compacted concrete
• machinery, Concrete slump should be kept between 75 mm and complete 120 mm
• is Cement content should be no less than 300 kg/m³
• Applying Proper concrete compaction and leveling is a must