KingFloor MM100®
Three-component self-leveling screed based on reactive acrylics for floors on wet and dry areas
Overview
KingFloor MM100 is a three component fast curing self- leveling screed based on elasticized methacrylate resin (MMA) for wet and dry areas. KingFloor MM100 will provide floors with very good thermal and mechanical properties and good resistance to acids and alkalis that is suitable for applications in wet and dry areas with a suitable topcoat. KingFloor MM100 Filler pack can be supplied either un- pigmented or pigmented in a variety of colours (consult KINGKRETE's Technical Department for further details). KingFloor MMSW (clear or pigmented) is used over KingFloor MM100 for industrial and commercial floors in wet areas. Quicktop MMSD (clear or pigmented) is used over KingFloor MM100 for industrial and commercial floors in dry areas.
Applications
- KingFloor MM100 topcoated with KingFloor MMSW is especially suitable for easy to clean hygienic indoor surfaces. KingFloor MMSW provides surfaces that are highly resistant to hot water, greasy water, and conventional cleaning agents
- This system is the ideal choice for wet areas in the food industry such as slaughter houses, poultry farms, fish industries, meat processing plants, dairies, fruit juice companies, restaurant and hotel kitchens, showers and washrooms
- KingFloor MM100 topcoated with KingFloor MMSD is especially suitable for decorative smooth floor coating for a wide range of floors exposed to light mechanical loads
- This system is the ideal choice for dry areas in bakeries, canteens, restaurants, supermarkets, retail shops, showrooms, laboratories, pharmaceutical factories, hospitals, schools, gymnasiums, public offices and general food processing and manufacturing plants
- * When applied in a smooth finish
- THERMAL RESISTANCE TOPCOAT TEMPERATURE RANGES Quicktop TC26 Permanent exposure to hot water up to 80°C (steam
Advantages
- Very fast curing, less than 2 hours
- Cures even at low temperatures
- Easy to clean and maintain flooring system
- High abrasion and scratch resistance
- Good UV resistance, low yellowing
- Can be available in a range of colours (Contact KINGKRETE Technical Department for further details)
- Good resistance to acids and alkalis
- The system KingFloor MM100/TC26 is resistant to fat and hot water (up to 80°C)
- The system KingFloor MM100/ aggregate/ KingFloor MMSW is slip-resistant and safe to walk on in wet areas
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Can be pigmented in a range of colours | — |
| Density (Base) | 0.98 ± 0.01 | — |
| Mixed density | 1.8 ± 0.1 g/cm3 | — |
| Coat thickness | *: 2 - 4 mm | — |
| Solids by weight | 100% | — |
| Application temperature | 5 to 30°C | — |
| Minimum overcoating time | 40 min (check the Potlife/ Hardening Table for different temperatures) | — |
| Foot traffic | 40 min (check the Potlife/ Hardening Table for different temperatures) | — |
| Full cure | 2 hrs | — |
| VOC | : 0 g/ltr | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingFloor MM100 is available in 25 kg packs (6.75 kg base liquid, 0.25 kg hardener powder and 18 kg filler or pigmented filler).
Primer Quicktop Primer or 2.5m2/kg/coat Quicktop Primer LV @ 400 microns dft Basecoat KingFloor MM100 5.4 Kg/m2 @ 3mm Topcoat Wet KingFloor MMSW 2.5 m2/kg/coat areas Dry areas KingFloor MMSD @ 400 microns dft 2.5 m2/kg/ coat @ 400 microns dft SYSTEM BROAD
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack