Flooring Systems
KingFloor C500®
Industrial grade floor topping.
flow ring
ISO 554: mins. 110 mm
ISO 554
Workability
15 min @20ºC
Vicat setting time
1.5 hr @20ºC
Heavy traffic
25ºC 3 days @ 25ºC
Coverage
KingFloor C500: 2.8…
Packaging
Pail
Overview
KingFloor C500 is designed as an industrial grade floor topping for upgrading and renovating new and existing internal floors. KingFloor C500 is supplied as a pre- blended dry powder designed for application between 5 - 15 mm (in one application) to provide a finished industrial floor.
Applications
- Suitable for use in a wide range of industrial environments subjected to medium to heavy traffic such as:
- Warehouses
- Food processing plants
- Pour or pump the mixed material onto the prepared surface and allow to attain a smooth finish. The use of a spiked roller will help eliminate entrapped air and smooth out flow lines. Apply at a thickness between of 5 - 15 mm in one pass only. It is always better to work in manageable sections of approximately 20m². It is recommended to seal KingFloor C500 with suitable epoxy resin or solvent based acrylic resin sealer, especially when water may come into direct contact with the cured KingKrete base
Advantages
- Self-smoothing
- Dimensionally stable
- Fast drying
- Can be pumped to cover an area of 2000 m2 per day
- Alternatively a coverage of 600 m2 per day can be achieved when hand applied, depending on manpower and equipment used
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Flow properties using 35cc Initial ≈ 130 mm After 15 | ||
| flow ring | : mins. 110 mm | ISO 554 |
| Workability | 15 min @20ºC | — |
| Vicat setting time | 1.5 hr @20ºC | — |
| Foot traffic | Light traffic: 10 hrs. @ 25ºC 24 hrs. @ | — |
| Heavy traffic | 25ºC 3 days @ 25ºC | — |
| *Compressive strength | > 25 MPa @ 7 days > 35 | — |
| BS6319, Part 2 | 1983: MPa @ 28 days | — |
| *Flexural strength | , >5 MPa @ 7 days >9 MPa | BS 6319 |
| Part 3 | 1990: @ 28 days | — |
| Shrinkage (μ/m) | ASTM: < 500 @ 28 days C490-00a Abrasion testing according to SS92 35 08 | — |
| After 7 days air cure | < 1 cm³ | — |
| After 7 days immersion in | < 2 cm³ water | — |
| Application thickness | 5 - 15 mm | — |
| Bond strength to concrete | > 1.5 MPa | — |
| *Note | dry cure. For application over all other surfaces including Surface Damp Proof Membranes (SDPM) and non-absorbent | — |
| surfaces | Prime with undiluted Neoprene Primer to ensure that good adhesion is obtained. | — |
Standards & Approvals
BS
BS 6319
BS
BS6319
ISO
ISO 554
ISO
ISO 9001 · 14001 · 45001Quality & EHS
Usage & Packaging
Packaging
KingFloor C500 is available in 25 kg bags. KingFloor Acrylic Primer is available in 5 and 25 liters pails.
Coverage
KingFloor C500: 2.8 m² @ 5 mm thickness for 25 kg bag mixed with 5 liters of clean water. KingFloor Acrylic Primer when diluted 3 parts potable water to one part primer: 40 m²/ 5 liters. 200 m²/ 25 liters.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack formats
Pail, Bag
Product family
Part of the KingFloor range