Flooring Systems
KingFloor C400®
Industrial grade floor topping.
flow ring
ISO 554: min ≥ 120 mm
ISO 554
Workability
15 min @20ºC
Vicat setting time
1.5 hr @20ºC
*Compressive strength
> 25 MPa @ 7 days > 35
Coverage
KingFloor C400: 2.9…
Packaging
Pail
Overview
KingFloor C400 is designed as an industrial grade floor topping for upgrading and renovating new and existing internal floors. KingFloor C400 is supplied as a pre-blended dry powder designed for application between 5 - 15 mm (in one application) to provide a finished industrial floor.
Applications
- Suitable for use in a wide range of industrial environments subjected to medium to heavy traffic such as:
- Warehouses
- Food processing plants
- Pour or pump the mixed material onto the prepared surface and allow to attain a smooth finish. The use of a spiked roller will help eliminate entrapped air and smooth out flow lines. Apply at a thickness between of 5 - 15 mm in one pass only. It is always better to work in manageable sections of approximately 20m²
Advantages
- Self-smoothing
- Dimensionally stable
- Fast drying
- Can be pumped to cover an area of 2000 m2 per day
- Alternatively a coverage of 600 m2 per day can be achieved when hand applied, depending on manpower and equipment used
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Flow properties using 35cc Initial ≥ 130 mm After 15 | ||
| flow ring | : min ≥ 120 mm | ISO 554 |
| Workability | 15 min @20ºC | — |
| Vicat setting time | 1.5 hr @20ºC | — |
| Foot traffic | Light traffic: 24 hr @ 25ºC 48 hr @ 25ºC | — |
| *Compressive strength | > 25 MPa @ 7 days > 35 | — |
| ASTM C109/109M-02 | MPa @ 28 days | — |
| *Flexural strength | , >5 MPa @ 7 days >8 MPa | BS 6319 |
| Part 3 | 1990: @ 28 days | — |
| Shrinkage (μ/m) | ASTM: < 400 @ 28 days C490-00a | — |
| Abrasion resistance | BS: Special class | — |
| 8204, Part 2 | 1999 | — |
| Slip resistance | , | BS 8204 |
| Part 2 | 1999 | — |
| Dry | 60 | — |
| Wet | 42 | — |
| Application thickness | 5 - 15 mm | — |
| Bond strength to concrete | >1.5 MPa @ 28 days | — |
| *Note | dry cure for compressive and flexural strengths @ 25⁰C. W/P = 0.19. Acid etching can be used after consulting with KINGKRETE's Technical Department. Surface defects such as voids and blowholes should be repaired before application. Consult KINGKRETE's Technical Department for the best repair material. Surfaces must be free of any dust or loose particles before product application. Use suitable methods like vacuuming or sweeping. If possible, apply the product on a small test area before actual application to check for any problems with the | — |
Standards & Approvals
ASTM
ASTM C109
BS
BS 6319
BS
BS 8204
ISO
ISO 554
ISO
ISO 9001 · 14001 · 45001Quality & EHS
Usage & Packaging
Packaging
KingFloor C400 is available in 25 kg bags. Cemflow Primer is available in 5 and 25 litre pails.
Coverage
KingFloor C400: 2.9 m² @ 5 mm thickness for 25 kg bag mixed with 5 litre of clean water. Cemflow Primer when diluted 3 parts potable water to one part primer: 40 m²/5 litre. 200 m²/25 litre.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack formats
Pail, Bag
Product family
Part of the KingFloor range