Grouts & Anchors Systems

KingGrout PCC50^®

High flow non-shrink cementitious pile top fairing and void filling grout.

⬇ Download TDS Request a Quote →

Compressive strength

20 MPa @ 1 day 40 MPa

Expansion characteristics

0.5 - 1% ASTM C827-87

ASTM C827-87

Maximum aggregate size

10 mm

Coverage

, 1 bag will give 1…

Packaging

Bag

Standards

5 cited

ASTM C827-87 · BS1881

Overview

KingGrout PCC50 is a cementitious, pre-mixed, pre- packed chloride and hydrogen free, high flow, pourable grout. It contains cement, selected additives, well graded and non- reactive aggregates and is designed to give excellent flow properties, shrinkage compensation, frost resistance, and high compressive strength.

Applications

KingGrout PCC50 is designed for pile cap reprofiling and as a general void filling. KingGrout PCC50 is applied between 15 and 250 mm thick. Greater thicknesses can be achieved, depending on the gap design and the steel volume. In conditions at or below the water table, use KingGrout PCC50 in conjunction with KingGrout PCE

Advantages

Non-shrink grout that has dual expansion properties to compensate for shrinkage in both the plastic and hardened stages
Extremely dense and low permeability
High early strength development allowing for rapid installation
High flow can be poured or pumped into variable gap widths
Easy to apply, single component which require only addition of water
Hydrogen and chloride free

Technical Properties

Property	Value	Standard
Compressive strength	20 MPa @ 1 day 40 MPa	—
BS1881, Part 116	@ 7 days 70 MPa @ 28 days	—
Permeability	, Part 5 < 10 mm	DIN1048
Flexural strength	, ≥ 2 MPa @ 1 day ≥ 7.5	BS6319
Part 3	1990: MPa @ 7 days ≥ 9.5 MPa @ 28 days	—
Colour	Grey powder with aggregates	—
Expansion characteristics	0.5 - 1%	ASTM C827-87
Maximum aggregate size	10 mm	—
Fresh wet density	2.3 ± 0.1 gm/ cm³	—
Setting time	Initial ≈ 5 – 6 hrs. ≈ 7 – 8 hrs. Final	BS4550