KingGrout GP62®
General purpose non-shrink cementitious grout.
Overview
KingGrout GP62 is pre-mixed, pre-packed chloride free cementitious grout. It contains cement, selected additives, well graded, and non-reactive aggregates and is designed to give excellent flow properties, shrinkage compensation, frost resistance, and high compressive strength.
Applications
- KingGrout GP62 is ideally designed for use in the following applications:
- Machine beds
- Stanchion bases, struts, railings, and guardrail assemblies
- Filling of shutter tie rod openings
- Anchoring of tie bars, and bolts
- Pile top re-profiling
Advantages
- Good non-shrinkage characteristics
- Extremely dense and low permeability
- High early strength development allowing for rapid installation
- High flow can be poured or pumped into variable gap widths down to 10 mm
- Easy to apply, single component which require only addition of water
- STANDARDS KingGrout GP62 complies with ASTM C1107, Grade A
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Compressive strength | ASTM ≥ 25 MPa @ 1 day ≥ 62 | — |
| C109/109M-11 | MPa @ 28 days | — |
| Flexural strength | ≥ 2 MPa @ 1 day ≥ 8.5 MPa @ 7 days ≥ 9.5 MPa @ 28 days | — |
| Colour | Grey, white and can be available in different colours | — |
| Expansion characteristics | Up to 3% /C827M-10 | ASTM C827 |
| Fresh wet density | 2.25 ± 0.05 g/cm³ | — |
| Bleeding | : Nil | ASTM C940 |
| Application temperature | 4 - 50ºC | — |
| Initial setting time @ 25oC | 8 hr | ASTM C191 |
| Final setting time @ 25oC | 12 hr | ASTM C191 |
| Service temperature | -20 - 200ºC | — |
Standards & Approvals
Usage & Packaging
KingGrout GP62 is available in 25 kg bags. KingGrout GP62 can be applied in a single layer at thickness between 10 - 100 mm. For greater thickness, an 8 - 12 mm washed aggregate should be added at a ratio of 14 - 15 kg of washed aggregate to 25 kg of King
Approximately 12.5 - 13 litre/25 kg bag depending on consistency.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bag, Can
Product family
Epoxy acrylate resin cartridge system for anchoring.
Epoxy acrylate anchoring system in crack and uncracked concrete under s…
High strength pourable epoxy foundation resin grout.
Pump applied, non-sagging cementitious joint filler for vertical joints…