KingRep 100LS®
One component medium build cementitious repair mortar.
Overview
KingRep 100LS is a one component, polymer modified, cementitious repair mortar for use in hot climates. KingRep 100LS is mixed with water to produce a thixotropic mortar suitable for vertical and overhead
Applications
- Repair of all types of structural concrete where high strength properties are required
- For the repair of vertical and overhead elements without using form-work
- As a repair mortar for all structural elements in buildings, water retaining structures, industrial plants, bridges, etc
Advantages
- Specially formulated for use in hot climates
- Easy to apply. Single component, requires only addition of water
- Low permeability to water, providing excellent protection to steel reinforcement and host concrete
- Thixotropic properties allowing extra high build for vertical and overhead applications
- Suitable for internal and external application
- Water vapour permeable
- Contains no chlorides
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Compressive strength (wet > 15 MPa @ 1 day > 40 | ||
| cure) | /109M-02 MPa @ 28 days | ASTM C109 |
| Colour | Grey | — |
| Water absorption | , 0.20 ml/m2/sec. @ 10 min | BS 1881 |
| Part 5 | 1970: 0.05 ml/m2/sec. @ 2 hr | — |
| Rapid chloride permeability | < 500 coulombs | AASHTO 277-93 |
| Tensile strength | ,: > 2 MPa @ 28 days | BS 6319 |
| Part 7 | 1985 | — |
| Flexural strength | , > 6 MPa @ 28 days | BS 6319 |
| Part 3 | 1990 | — |
| Mixing ratio | 4.5 litre of water for 25 kg bag of KingRep 100LS | — |
| Fresh wet density | 1.7 ± 0.1 g/cm³ | — |
| Drying shrinkage | ASTM: < 300 microstrain @ 7 | — |
| C157 | days | — |
| Minimum application | 5°C | — |
| temperature | Areas to be repaired with KingRep 100LS should be soaked with clean water before applying the repair mortar. All excess water should be removed prior to applying KingRep 100LS. | — |
Standards & Approvals
Usage & Packaging
KingRep 100LS is available in 25 kg bags. KingRep 100LS can be applied in a single application for sections up to 20 mm thick in overhead applications and 50 mm thick in vertical applications. Thickness should not be less than 10 mm deep in all applicatio
Approximately 16 - 17 litre per 25 kg bag. (60 bags/m3).
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bag, Can
Product family
Crack filling polymer modified cementitious fairing coat repair mortar.
Shrinkage compensated free flowing micro concrete.
Medium build, high strength cementitious repair mortar.
Two component polymer modified cementitious fairing coat and cosmetic r…