KingGrout PE10 is a two components, high strength, fast cure, polyester resin anchoring grout.
Applications
KingGrout PE10 is ideally designed for use in the following applications:
Permanent installation of reinforcement starter bars and dowel bars
Permanent installation of hand rails, safety fence, wall ties, railway tracks and ground anchors
KingGrout PE10 V should be used for vertical applications. The mixed material should be poured into the prepared holes. The bar/bolt should then be pressed and twisted into the grout
Care should be taken to ensure that the bottom and the side are thoroughly scraped and transferred. The filler shall be gradually added to the plastic container containing the resin while mixing
DESIGN CONSIDERATION
Advantages
Exceptional rapid strength development
Resistant to dynamic loading
Damp tolerant. The product will cure under damp conditions and is resistant to immersion underwater
Exceptional high compressive, flexural and tensile strengths
Extremely dense
Exceptional bond to concrete and steel surfaces
Good chemical resistance
High ultimate and early strengths. Available into two grade, KingGrout PE10 H (Horizontal) and KingGrout PE10 V (Vertical)
