Description
KingGrout MC100 is a polymer modified, ready to use interior and exterior block adhesive specially designed for use with blocks and bricks.
Applications
- For permanent fixing of all types of blocks and bricks
- Can be used internally and externally
- Spread to a uniform thickness of 15 - 25 mm using a trowel
- Place blocks firmly over the applied area
- CURING
- The applied areas should be protected from direct sunlight and heavy wind. Curing with water is needed for at least 2 - 3 days after setting
Advantages
- Water resistant, will not be affected in wet areas
- Low permeability to water
- Ready for use, just requires the addition of water
- Non sag, good consistency
- High bond strength
- Suitable for internal and external application
- Shrinkage controlled, polymer modified cementitious mortar
- Complies with the LEED requirements for VOC
