KingFloor CP is a three component water based trowel applied polyurethane resin based coving system. KingFloor CP is used to form seamless radius coving at the junction between wall and floor surfaces.
Applications
On completion of mixing immediately apply KingFloor CP at the required thickness to KingFloor primer
Make a final pass with the trowel to smooth any marks in the cove. If necessary, a small amount of light water mist may be used to help reduce trowel drag
When applying each pack of KingFloor CP, leave approximately 200 mm of the closest working edge un-trowelled as this will help the blending in of the next pack
Take care not to excessively trowel the KingFloor CP as this will lead to burnish marks on its surface
Note: Never leave the mixed KingFloor CP to stand for any length of time before application, as this will considerably shorten its working time
Advantages
Provides hygienic floors
Resistant to boiling water and to a wide range of chemicals (consult KINGKRETE Technical Department for more details)
Hard wearing and excellent impact resistance
Resistant to thermal shock and to temperatures − 40oC to 120oC at 9 mm thickness; − 40oC to 70oC at 6 mm thickness
Easy to clean
Resistant to freeze/thaw cycles
Note: KingFloor CP is not colour stable and may dis-colour on ageing and exposure to UV light, especially with light colours. This will not adversely affect the performance of the product
