KingSeal SN100 is a one-part Low Modulus Neutral Cure Silicone Sealant, which cures on exposure to moisture vapour to form an elastic silicone rubber.
Applications
STANDARDS
KingSeal SN100 complies with BS EN ISO11600 F/G 20 LM, BS5889, Type A:1989 and BS6920, Part 1:1990
KingSeal SN100 is supplied in cartridges and can be applied into the joint using a skeleton gun. Cut-off the cartridge top then the nozzle to required size
It is recommended to use masking tape on each side of the joint to maintain a clean and uniform joint sides. Remove the masking tape directly after tooling the sealant
