KingMix 60PC®
High performance polycarboxylic ether based superplasticiser.
Overview
KingMix 60PC is a high performance superplasticising admixture based on polycarboxylic ether polymers with long chains specially designed to enable the water content of the concrete to perform more effectively. This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
Applications
- High strength and high performance concrete
- Structures with congested reinforcement
- Improved cohesion allow for use in mass concrete pours and piling
Advantages
- Optimises cement utilization
- High density and impermeable concrete through very high water reduction
- Improves shrinkage and creep behaviors
- Minimizes segregation and bleeding problems by improving cohesion
- Higher early and ultimate compressive strengths
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability
- COMPATIBILITY KingMix 60PC can be used with all types of Portland cement and cement replacement materials
- KingMix 60PC should not be used in conjunction with other admixtures unless KINGKRETE Technical Department approval is obtained
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Dark brown liquid | — |
| Freezing point | ≈ -1°C | — |
| Specific gravity | 1.05 ± 0.002 | — |
| Air entrainment | Typically less than 2% additional air is entrained above control mix at normal dosages | — |
Usage & Packaging
KingMix 60PC is available in 25 liters pails, 210 liters drums and 1000 liters bulks supply.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bulk/IBC, Drum, Pail
Product family
Special hardening accelerator for cementitious materials
Cold weather concreting admixture.
Corrosion inhibiting admixture for reinforced concrete.
High performance water reducer admixture for HSC.