KingMix 600PC®
High performance polycarboxilic based, concrete superplasticiser
Overview
KingMix 600PC is a high performance super plasticising admixture based on polycarboxylic polymers with long chains specially designed to enable the water content of the concrete to perform more effectively. This effect can be used in high strength, low w/c ratio and flowable concrete mixes, to achieve highest concrete durability and performance in the ready-mix and precast concrete industries.
Applications
- High strength and high performance concrete
- Pre-cast concrete
- Improved cohesion allow for use in mass concrete pours and piling
- High durability concrete
- Structures with congested reinforcement
- For high levels concrete pumping
- Self-compacting concrete
Advantages
- Optimizes cement utilization
- Improves shrinkage and creep behaviors
- High density and impermeable concrete through very high water reduction
- Higher early and ultimate compressive strengths
- Minimizes segregation and bleeding problems by improving cohesion
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability
- COMPATIBILITY KingMix 600PC can be used with all types of Portland cement and cement replacement materials
- KingMix 600PC should not be used in conjunction with other admixtures unless KINGKRETE Technical Department approval is obtained
- STANDARDS KingMix 600PC complies with BS EN934-2 1998 and ASTM C494, Type G
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Light yellow liquid | — |
| Freezing point | -1°C | — |
| Specific gravity | 1.07 ± 0.03 | — |
| Air entrainment | Typically less than 2% at normal dosages | — |
| Chloride content | : Nil Automatic dispenser should be used to dispense the correct quantity of KingMix 600PC to the concrete mix. | BS5075 |
Standards & Approvals
Usage & Packaging
KingMix 600PC is available in 25, 210 and 1000 litre bulks supply.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bulk/IBC
Product family
Special hardening accelerator for cementitious materials
Cold weather concreting admixture.
Corrosion inhibiting admixture for reinforced concrete.
High performance water reducer admixture for HSC.