KingMix 212PC®
High performance polycarboxylic ether based superplasticiser.
Overview
KingMix 212PC is a high performance superplasticising admixture based on polycarboxylic ether polymers with long chains specially designed to enable the water content of the concrete to perform more effectively. This effect can be used in high strength concrete and flowable concrete mixes, to achieve highest concrete durability and performance.
Applications
- High strength and high performance concrete
- Structures with congested reinforcement
- Improved cohesion allow for use in mass concrete pours and piling
Advantages
- Optimises cement utilization
- Improves shrinkage and creep behaviors
- High density and impermeable concrete through very high water reduction
- Higher early and ultimate compressive strengths
- Minimizes segregation and bleeding problems by improving cohesion
- Increases durability and resistance to aggressive atmospheric conditions thorough reduced permeability
- COMPATIBILITY KingMix 212PC can be used with all types of Portland cement and cement replacement materials. KingMix 212PC should not be used in conjunction with other admixtures unless KINGRKETE Technical Department approval is obtained
- STANDARDS KingMix 212PC complies with ASTM C494, Type G and BS EN 934-2
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | Yellowish to brownish liquid | — |
| Freezing point | ≈ -1°C | — |
| Specific gravity | 1.04 ± 0.02 | — |
| Air entrainment | Typically less than 2% additional air is entrained above control mix at normal dosages | — |
Usage & Packaging
KingMix 212PC is available in 25 litre pails, 210 litre drums and 1000 litre bulks supply.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bulk/IBC, Drum, Pail
Product family
Special hardening accelerator for cementitious materials
Cold weather concreting admixture.
Corrosion inhibiting admixture for reinforced concrete.
High performance water reducer admixture for HSC.