KingFloor Conductive®
Flow-applied electrostatic discharge (ESD) epoxy coating.
Overview
KingFloor Conductive is a flow applied solvent free, electrostatic conductive epoxy floor coating especially designed to provide electrostatic control properties to a variety of substrates in wide range of applications. KingFloor Conductive comprises of an epoxy primer, conductive base coat and 2.0 mm flow applied topcoat.
Applications
- KingFloor Conductive is suitable for use in areas where a static conductive floor is required, such as:
- Electronic manufacturing facilities
- Hospital operation theatres
- Hazardous dust and chemical environments
- Data processing areas
- Military and aerospace facilities
Advantages
- Provide a conductive floor for static electricity to pass through to earth controlling static electricity
- Provide anti-spark (spark-proof) whenever required for safety to prevent sparks
- Alternative smooth finish
- Hard wearing surface that can be subjected to heavy foot traffic and forklift traffic
- Chemical resistant
- STANDARDS When applied in accordance with the below stated instruction, KingFloor Conductive is designed to fulfill the requirements of the following standards:
- ASTM F150 for conductive flooring range
- ANSI/ESD S20.20
- DoD 4145.26-M “Contractor's Safety Manual for Ammunition and Explosives”
Technical Properties
| Property | Value | Standard |
|---|---|---|
| PHYSICAL PROPERTIES FOR TOP COAT | — | |
| Colour | Variable | — |
| Shore D hardness | ASTM: 85 ± 5 @ 14 days D2240 | — |
| Compressive strength | BS: ≥ 75 MPa @ 7 days | — |
| 6319, Part 2 | 1983 | — |
| Flexural strength | ASTM: ≥ 40 MPa @ 7 days C580 | — |
| Tensile strength | ≥ 20 MPa @ 7 days | ASTM C307 |
| Cure time | Foot traffic: 24 hr @ 25oC 48 hr @ | — |
| Vehicular traffic | 25oC | — |
| Mixed density | 1.6 ± 0.1 g/cm³ | — |
| Pot life | 40 - 60 min @ 25⁰C | — |
| VOC | < 50 g/ltr | — |
Standards & Approvals
Usage & Packaging
KingFloor Primer: 5 kg packs. KingFloor Conductive Top Coat: 15 kg packs. KingFloor Conductive Base Coat: 5 kg packs.
KingFloor Primer: 5 m2/kg. KingFloor Conductive Top Coat: 3.2 kg/m2. KingFloor Conductive Base Coat: 4.5 m2/kg. Actual coverage can vary depending on the substrate conditions.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack