KingFloor AS200®
Water based polyurethane anti-slip/sealer for concrete, cement screeds, resin, vinyl, wood, and parquet floors
Overview
A KingFloor AS200 is a two component water based polyurethane anti-slip/sealer that works very effectively on internal smooth concrete, special cement screeds, wood, parquet, vinyl floorings, epoxy and polyurethane based floor coatings. KingFloor AS200 provides a matt finish and protects floors from stains left behind from spillages (See chemical resistance table).
Applications
- KingFloor AS200 is designed for internal use in public places such as:
- Restaurant and hotel kitchens
- Reception areas, sanitary hospital, retail stores, warehouses, and showrooms
- Office buildings, schools, colleges, and universities
- Sports halls, exhibition centers gymnasiums, ramps and locker rooms
- Retail environments, shopping malls and many more
Advantages
- Safer floors, less risk of slips or falls
- Outstanding slip resistance; up to 50 - 60 Wet Pendulum Test Value can be reached
- Provides excellent stain resistance
- Rapid drying time, permits faster use of floors
- Excellent durability
- Slight modification of the surface roughness of the substrate; A good cleaning regime will not be different to that prior to treatment
- Easy to maintain and to clean
- UV Resistant (internal lighting)
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Appearance | Matt | — |
| Colour | Clear | — |
| Mixed density | 1.063 g/cm3 @ 250C | — |
| Mixed viscosity | 57cP @ 250C | — |
| Pot life | > 3 hr @ 250C Solid Content | — |
| By volume | 36% | — |
| By weight | 40% Recommended film thickness | — |
| Concrete & screeds | 160 - 200 microns wet (2 coats) 60 - 70 microns dry (2 coats) | — |
| Non-porous substrates | 80 - 100 microns wet (1 coat) 30 - 35 microns dry (1 coat) | — |
| Drying time | 30 - 40 min @ 250C | — |
| Time between coats | Minimum 2 hr | — |
| Light traffic (after second | After 12 hr coat) | — |
| Full cure | 72 hr Bond strength (to KingFloor >2 MPa (concrete failure) EP100 and KingFloor SL350 | ASTM D4541 |
| Taber abrasion resistance | 24 mg (1000g, 1000 cycle) , weight loss CS17 wheel STANDARDS KingFloor AS200 complies with requirements of HSE Risk Assessments for Floor Safety when tested according to | ASTM D4060 |
| BS 7976-2 | 2002 and . KingFloor® AS200 Water based polyurethane anti-slip/sealer for concrete, parquet floors | BS 13036-4:2011 |
Standards & Approvals
Usage & Packaging
KingFloor AS200 is supplied in 4.5 litre packs for resin "B" component and 400 ml packs for hardener "H" component.
Approximately 50 - 60 m²/pack/coat.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Cartridge/Tube