KingDeck HP System®
A hard-wearing polyurethane traffic coating system.
Overview
KingDeck HP System is a hard-wearing, polyurethane coating system primarily designed for use in car parks. It has excellent resistance to abrasion and wear and excellent chemical resistance to petrol, diesel, engine oil, brake fluid and de-icing salts. The KingDeck HP System consists of the following components: KingDeck Primecoat U: a two component, solvent-free epoxy primer with excellent adhesion to concrete and cementitious substrates. Antislip Aggregate #3: a hard-wearing quartz aggregate for producing an anti-slip finish. KingDeck Wearcoat TE: a two component, solvent- free, pigmented wearing course with excellent resistance to abrasion and chemical attack.
Applications
- KingDeck HP System is designed for application in different areas of car parks, such as:
- Ramps and turning circles
- Traffic aisles and parking bays
- Pedestrian walkways
Advantages
- Excellent resistance to petrol, diesel, engine oil and brake fluid
- Resistant to de-icing salts
- Available in both smooth and aggregate broadcast finishes for different slip resistance requirements
- CHEMICAL RESISTANCE KingDeck HP provides resistance to a wide range of oils, fuels, solvents, acids and bases commonly encountered in car parks. For detailed information, contact KINGKRETE’s Technical Department
Technical Properties
| Property | Value | Standard |
|---|---|---|
| KingDeck Primecoat U KingDeck Wearcoat TE | ||
| Colour | Brownish clear Variable | — |
| Mixed density | 1.5 ± 0.1 g/cm3 1.4 ± 0.1 g/ cm3 | — |
| Volume solids | 100% | — |
| Pot life @25˚C | 60 - 90 min 100 - 140 min | — |
| Over-coating time @25˚C | 24 hr 6 - 8 hr | — |
| Full cure @ 25oC | 7 days | — |
| Bond strength on C25/30 | ≥ 2.0 MPa (concrete | — |
| concrete | : failure) | ASTM D4541 |
| Shore D hardness | ASTM: Not tested ≥ 80 D2240 | — |
| Taber abrasion | (1000 g,: Not tested ≤ 80 milligram 1000 cycles) CS17 wheel | ASTM D412 |
| Tensile strength @ 7 days | Not tested ≥ 10 MPa COVERED DECKS (INDOOR APPLICATION) Antislip finish for ramps and turning circles One coat KingDeck Primecoat U + full blind of Antislip Aggregates #3. Two coats of KingDeck Wearcoat TE. Antislip finish for traffic aisles and parking bays One coat KingDeck Primecoat U+ full blind of Antislip Aggregate #3. One coat KingDeck Wearcoat TE. Smooth finish for traffic aisles and parking bays One coat KingDeck Primecoat U. One coat KingDeck Wearcoat TE. | ASTM D412 |
| Note | Other grades of Anti-slip Aggregates can be used but finish should be checked and approved by end user. CAR PARKS DECKS | — |
Standards & Approvals
Usage & Packaging
KingDeck Primecoat U is available in 18 kg packs. KingDeck Wearcoat TE is available in 18 kg packs. Antislip Aggregates is available in 25 kg bags.
Application Antislip finish Smooth finish Ramps & turning Traffic circles aisles & parking bays KingDeck One coat 0.20 - Primecoat U 0.30 kg/m2/coat, depending on surface texture and porosity Antislip 1 - 2 kg/ m2 Aggregate #3 KingDeck Two coats 0.45 kg/
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bag
Product family
Solvent free slip resistant flexible polyurethane vehicle decking system.
Solvent free slip resistant flexible waterproofing polyurethane vehicle…
Solvent free crack bridging membrane.
High build epoxy polyurethane car park decking system.