Joint Sealing Systems
KingSeal SN100®
Neutral cure silicone sealant
Elongation
ASTM D412: > 400%
ASTM D412
Skinning time
15 ± 5 min
Service temperature
-20 up to 80°C
Application temperature
5 to 50°C
Packaging
Cartridge/Tube
Standards
1 cited
ASTM D412
Overview
KingSeal SN100 is a one-part Low Modulus Neutral Cure Silicone Sealant, which cures on exposure to moisture vapour to form an elastic silicone rubber.
Applications
- Recommended for use in many forms of construction including glass wall assemblies, perimeter seals on curtain walling, perimeter sealing of polyester powder coated frames and glazing of windows in swimming pool buildings. KingSeal SN100 is fungicide
- STANDARDS LM, BS5889, Type A:1989 and BS6920, Part 1:1990
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Consistency | Soft paste | — |
| Elongation | : > 400% | ASTM D412 |
| Specific gravity | Transparent 1.00 ± 0.05 1.25 ± 0.05 Coloured | — |
| UV resistance | Very good | — |
| Skinning time | 15 ± 5 min | — |
| Shore A hardness | ASTM: 20 ± 5 D2240 | — |
| Tensile strength | 1.0 ± 0.1 MPa | ASTM D412 |
| Service temperature | -20 up to 80°C | — |
| Application temperature | 5 to 50°C | — |
| Chemical resistance | Resistant to most alkalis and dilute acids. Organic solvents may cause the sealant to swell and lose adhesion, but do not directly dissolve the sealant | — |
| Service life | +25 years | — |
| Curing rate | 2 - 3 mm/day | — |
| Colours | White, black, grey, mahogany, translucent & anthracite | — |
| VOC | < 30 g/ltr | — |
Standards & Approvals
ASTM
ASTM D412
ISO
ISO 9001 · 14001 · 45001Quality & EHS
Usage & Packaging
Packaging
25 x 280 ml plastic cartridges. Polyethylene nozzles are included in each box. SEALANT QUANTITY ESTIMATOR
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack formats
Cartridge/Tube, Carton/Box
Product family
Part of the KingSeal range