Grouts & Anchors Systems

KingGrout MC100^®

Block and brick premixed laying mortar.

⬇ Download TDS Request a Quote →

Fresh wet density (mixed)

2.0 ± 0.1 g/cm³

Pot life

1 - 2 hr

Maximum aggregate size

3.0 mm

Initial setting

2 - 3 hr

Coverage

14 litres per 25 kg…

Packaging

Bag

Overview

KingGrout MC100 is a polymer modified, ready to use interior and exterior block adhesive specially designed for use with blocks and bricks. KingGrout MC100 is composed of a blend of cement, sand, limestone, dry powder additives and selected polymers which when mixed with water produces a thixotropic mortar suitable for fixing all types of blocks and bricks, and to be used on the block walls for filling gaps.

Applications

For permanent fixing of all types of blocks and bricks
Can be used internally and externally

Advantages

Water resistant, will not be affected in wet areas
Low permeability to water
Ready for use, just requires the addition of water
Non sag, good consistency
High bond strength
Suitable for internal and external application
Shrinkage controlled, polymer modified cementitious mortar
Complies with the LEED requirements for VOC
STANDARDS KingGrout MC100 complies with the requirements of ASTM C387, C1714, C270 Type S, N and O

Technical Properties

Property	Value	Standard
Appearance	Grey cement based powder	—
Fresh wet density (mixed)	2.0 ± 0.1 g/cm³	—
Skin over time	8 mins. @ 20 mm thickness	—
Pot life	1 - 2 hr	—
Compressive strength	ASTM > 14 MPa @ 28 days C109/109M-02	—
Flexural strength	, ≥ 2.0 MPa @ 28 days	BS6319
Part 3	1990	—
Maximum aggregate size	3.0 mm	—
Initial setting	2 - 3 hr	—
Temperature limitations	Below 5⁰C & above 38⁰C	—