Surface Treatment Systems
KingForm 200SR®
Water based surface retarding gel for concrete.
Appearance
Green liquid
Packaging
Bucket
Overview
KingForm 200SR is a ready for use, water based. Single component, concrete gel surface retarder.
Applications
- KingForm 200SR is used to produce an exposed aggregate concrete finish and to produce mechanically good construction joint. KingForm 200SR is ideally designed for use in either face up or face down concrete elements in the following applications:
- All types of cast in situ concrete elements
- Pre-cast concrete elements
- Construction and Contraction joints
Advantages
- Single component, easy to apply; can be brush-able and spray-able
- Suitable for all types of concrete elements, shapes and strengths
- No independent release agent required
- Can be used for both face up and face down
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Appearance | Green liquid | — |
| Specific gravity | 1.05 ± 0.05 | — |
| Viscosity | 10 - 20 poise | — |
| Penetration depth | 0.5 - 8 mm @ 0.15 ltr/m2 (depending on water dilution rate) Once the concrete shutter or moulds removed or the face up concrete surfaces reached final setting, the retarded portion of concrete surface layer is easily removed by water washing or wire brush. | — |
Usage & Packaging
Packaging
KingForm 200SR is available in 1, 5 and 18 litre buckets.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack formats
Bucket
Product family
Part of the KingForm range